Call Transfer

Feature:	Inquiry Call or Blind Transfer
Default directory number:	2 (During conversation)
Feature number:	55
Parameter 1:	0 = Inquiry (default) 1 = Blind transfer (from AMC 10.50)
Description:	Place the current conversation on hold, and call the third station. Or with parameter 1 = 1 do a blind transfer to a third station or feature. Call Transfer options Consult, then Transfer: Press 2 during conversation to put the station on hold, the station on hold will receive a busy signal Dial the directory number of the third station and establish a second conversation Press digit 2 again you can switch between the two conversations (Brokers function) Press digit 3 to transfer the call and disconnect yourself, or alternatively, press C-key to cancel the first conversation, then C-key again to cancel the second conversation Blind Transfer: Press 2 during conversation to put the station on hold, the station on hold will receive a busy signal Dial the directory number of the third station or an idle feature code. Station on hold will connect to the feature dialed and disconnect yourself. Blind Transfer (feature 55/1) is not included in Factory Default. To enable digit "2" for Blind Transfer, modify the parameter 1 as indicated in the screen shot below. Change "ID" to "1" to turn digit 2 into a Blind Transfer Note: On an outgoing SIP Trunk call from an analog station one must press DAK 9 to switch off “transparent mode”, then 2 + number + 3. On an outgoing SIP Trunk call from an IP station one must press DAK 4 to switch off “transparent mode”, then 2 + number + 3. See also Blind Transfer During Connection

Back to feature list