Uploading HTTPS certificate: Difference between revisions
From Zenitel Wiki
(Created page with "{{ES}} This article describes how to upload a SSL certificate to the Turbine station for use with HTTPS. {{note|In IC-Edge mode, Advanced Configuration Mode (Edge)|Advanced...") |
No edit summary |
||
| Line 2: | Line 2: | ||
This article describes how to upload a SSL certificate to the Turbine station for use with HTTPS. | This article describes how to upload a SSL certificate to the Turbine station for use with HTTPS. | ||
{{note| | {{note|If the device is in IC-Edge mode, [[Advanced Configuration Mode (Edge)|Advanced Configuration Mode]], must be enabled}} | ||
*Select '''Edge Configuration'''/'''SIP Configuration''' and from the left hand menu select '''Certificates'''. The Turbine certificates are listed. | *Select '''Edge Configuration'''/'''SIP Configuration''' and from the left hand menu select '''Certificates'''. The Turbine certificates are listed. | ||
Revision as of 10:23, 20 March 2024
This article describes how to upload a SSL certificate to the Turbine station for use with HTTPS.
|
If the device is in IC-Edge mode, Advanced Configuration Mode, must be enabled |
- Select Edge Configuration/SIP Configuration and from the left hand menu select Certificates. The Turbine certificates are listed.
- First, generate a Certificate Signing Request (CSR). Enter the required data in each field and click Generate.
 |
| Enter the required information and click Generate |
- Download the CSR
 |
| Download the CSR |
- Get a SSL certificate from a certified Certificate Authority (CA) using the generated CSR
- The name of the SSL certificate must be changed to end with _https.pem.
- If there are multiple certificates the last one will always be used.
- Click on Choose file and browse to the location of the SSL certificate. When selected click on the Upload button
 |
| Uploaded the SSL Certificate |