Operating the TEIV-1+: Difference between revisions
From Zenitel Wiki
Lennert.werf (talk | contribs) |
|||
| Line 9: | Line 9: | ||
[[File:TEIVcsv.png|thumb|left]] | [[File:TEIVcsv.png|thumb|left]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
* A maximum of 30 pin codes can be uploaded | |||
* When saving the CSV file the seperation character should be defined as semicolon (;). | * When saving the CSV file the seperation character should be defined as semicolon (;). | ||
* Upload the pin code list file under the Address Book menu as shown below | * Upload the pin code list file under the Address Book menu as shown below | ||
Revision as of 08:45, 7 May 2024
Making a call
- To make a call – you need to press “#” followed by the number to be called to and then the checkmark (v), e.g. # 201 v
- To make a call using address book – use the checkmark after selection is done
- To activate a relay from keyboard, you need to press a pin code (e.g. 4 digits).
Defining PIN code(s)
- To define a pin code – create a csv file with 4 digits numbers as shown in the example below:
- A maximum of 30 pin codes can be uploaded
- When saving the CSV file the seperation character should be defined as semicolon (;).
- Upload the pin code list file under the Address Book menu as shown below
|
Encrypted pin codes are stored here: http://[IP address of the station]:8080/state/config/gui/door_access_control
Make sure port 8080 port in the device firewall is opened |