Difference between revisions of "Uploading HTTPS certificate"
From Zenitel Wiki
(→Version 9 and later) |
|||
| Line 3: | Line 3: | ||
__TOC__ | __TOC__ | ||
==Version 9 and later== | ==Version 9 and later== | ||
| − | {{note| | + | {{note|Enable [[Advanced Configuration Mode (Edge)|Advanced Configuration Mode]].}} |
*Select '''Advanced Network''' and from the left hand menu select '''HTTPS Certificates'''. The current self-signed HTTPS certificate is listed. | *Select '''Advanced Network''' and from the left hand menu select '''HTTPS Certificates'''. The current self-signed HTTPS certificate is listed. | ||
Revision as of 08:04, 25 October 2024
This article describes how to upload a SSL certificate to the Turbine station for use with HTTPS.
Version 9 and later
|
Enable Advanced Configuration Mode. |
- Select Advanced Network and from the left hand menu select HTTPS Certificates. The current self-signed HTTPS certificate is listed.
- First, generate a Certificate Signing Request (CSR). Enter the required data in each field and click Generate.
 |
| Enter the required information and click Generate |
- Download the CSR
 |
| Download the CSR |
- Get a SSL certificate from a certified Certificate Authority (CA) using the generated CSR
- The name of the SSL certificate must be changed to end with _https.pem.
- If there are multiple certificates the last one will always be used.
- Click on Choose Certficate and browse to the location of the SSL certificate. When selected click on the Upload button
 |
| Upload the SSL Certificate |
Version 8 and earlier
|
|
If the device is in IC-Edge mode, Advanced Configuration Mode, must be enabled |
- Select Edge Configuration/SIP Configuration and from the left hand menu select Certificates. The Turbine certificates are listed.
- First, generate a Certificate Signing Request (CSR). Enter the required data in each field and click Generate.
 |
| Enter the required information and click Generate |
- Download the CSR
 |
| Download the CSR |
- Get a SSL certificate from a certified Certificate Authority (CA) using the generated CSR
- The name of the SSL certificate must be changed to end with _https.pem.
- If there are multiple certificates the last one will always be used.
- Click on Choose file and browse to the location of the SSL certificate. When selected click on the Upload button
 |
| Uploaded the SSL Certificate |