Revision as of 12:49, 3 October 2024

This document provides the release notes for VSFF8MP 9.0 with incremental bug fix releases. The release notes for VSF-Fortitude8 9.0 describe new features, improvements and issues fixed after vsff8mp-8.3.3.2.

Release info

Name: VSF-Fortitude8
Description: vsff8mp is a firmware for Zenitel display series including the following devices: ZMK-1, ZDD-1

The firmware is delivered in two different files:

vsff8mp-9.0.3.x - Used for standard in-field upgrades
vsff8mp-prod-9.0.3.x - Used in production- and recovery upgrades.

Version: 9.0.3.0
Date: 03.10.2024
Status: General Availability

VSFF8MP 9.0.3.0

Improvements

MTN-4397 Improved certificate handling, and split SIP and HTTPS certificates into separate pages

Split SIP and HTTPS certificates into separate pages, removed turbine_server_sha1.key private key and TLS Private Key option, added factory reset handling, added backup and recovery for SIP certificates, fixed certificate regeneration on some devices, removed private keys from the device web page.

MTN-3557 New configuration option for RTSP Audio Source

There’s a new option for configuring RTSP Audio Source, “Mixed signal”. This option mixes far and near end signal.

DS-1034 Added support for codec L16x48 to Multicast Paging config

Devices can now listen to raw PCM 48 kHz audio stream (L16x48) when configured in HD-Audio mode.

DS-970 Added multicast relay feature

Device can now relay incoming RTP to specified address and port.

DS-928 Extended characters for vdak entries

This is now allowing up to 255 characters and also special symbols such as @ that are allowed in sip invite.

Fixed Issues

MTN-4435 RTSP stream could stop in some cases

In case of audio issues, RTSP stream would terminate. Now the stream will continue with a moment of silence instead.

MTN-4394 Multicast paging working again on intercom devices

Multicast paging was not working on intercom devices when configuring from the webpage. This is now fixed.

MTN-4362 Fixed wrong description in Sound Detection settings

The description of “Minimum time before reactivation” is corrected to “Choose how long to wait before enabling VAD after triggering the DAK key”

Note! This max level is loud and intended for use on heavy noisy environments and when using additional protective ear-plugs.

MTN-4228 Turbine devices could not be used with Bosch VMS

There was a problem on Zenitel ONVIF devices that caused software to crash and device to reboot which made Bosch VMS unable to connect to the device.

@@ Line 14: / Line 14: @@
 '''Status:''' General Availability<br>
-=VSFF8MP 8.2.3.0=
+=VSFF8MP 9.0.3.0=
 == Improvements==
-===DS-899 SIP/SDP support for dynamic payload for codec L16x48 (HD-Audio)===
+=== MTN-4397 Improved certificate handling, and split SIP and HTTPS certificates into separate pages===
-Now supporting SIP media attribute L16/48000 with dynamic payload type in range 96..127.
+Split SIP and HTTPS certificates into separate pages, removed turbine_server_sha1.key private key and TLS Private Key option, added factory reset handling, added backup and recovery for SIP certificates, fixed certificate regeneration on some devices, removed private keys from the device web page.
-Note! The device needs to be configured in “HD-Audio” mode and voice processing (AEC and NC) is not supported.
-===DS-809 Removed need to apply General Settings in GUI Settings page for Multi-purpose IP Intercom Module ZMK===
+=== MTN-3557 New configuration option for RTSP Audio Source===
-Now General Settings are auto applied on save which will cause gui application to reboot to apply settings.
+There’s a new option for configuring RTSP Audio Source, “Mixed signal”. This option mixes far and near end signal.
-===DS-798 	Improved digital zoom===
+=== DS-1034 Added support for codec L16x48 to Multicast Paging config===
-Now image is more clear when zooming. Also possible to zoom down to X4.
+Devices can now listen to raw PCM 48 kHz audio stream (L16x48) when configured in HD-Audio mode.
+=== DS-970 Added multicast relay feature===
+Device can now relay incoming RTP to specified address and port.
+=== DS-928 Extended characters for vdak entries===
+This is now allowing up to 255 characters and also special symbols such as @ that are allowed in sip invite.
 <br>

Difference between revisions of "VSF-Display Series 9.0 Release Notes"

From Zenitel Wiki