Time Settings (Zenitel Connect Pro): Difference between revisions

Latest revision as of 21:30, 14 February 2026

Introduction

Cybersecurity requirements mandate that all devices connected to Zenitel Connect Pro are time‑synchronized with the server. For this reason, Zenitel Connect Pro functions as the NTP server for all connected devices.

Zenitel Connect Pro can itself synchronize time with an external NTP server. If no NTP server is available, the system time can be set manually.

Although a time zone can be configured, Zenitel Connect Pro internally uses UTC. All logs and all timestamps included in API responses are generated in UTC. The configured time zone is used only to present the correct local date and time on devices equipped with a display.

Time configuration

The time settings can be configured in the Service Connections tile in the System section

Time Settings

Time source

NTP Server

The default NTP Server address is pool.ntp.org, edit as appropriate. The time zone is by default UTC. The timezone can be changed by either:

Selecting a timezone from the dropdown list
Clicking the button labeled Map and subsequently selecting a timezone on the map

Manual

If an NTP server is not available, select Set time using: Manual. Edit the date and time directly in the edit field, or use the date/time picker to set date and time. The time should be set as UTC and adapted to local time by setting the correct timezone.

Selecting a timezone from the dropdown list
Clicking the button labeled Map and subsequently selecting a timezone on the map

Homepage (Zenitel Connect Pro)

@@ Line 1: / Line 1: @@
 {{C}}
 ==Introduction==
-Cyber security restrictions requires that all devices connected to Zenitel Connect Pro are time synchronized with Zenitel Connect Pro, which therefore acts as the NTP-server for all connected devices.
+Cybersecurity requirements mandate that all devices connected to Zenitel Connect Pro are time‑synchronized with the server. For this reason, Zenitel Connect Pro functions as the NTP server for all connected devices.
-Zenitel Connect Pro itself can be connected to an NTP-server. If an NTP-server is not available, the time can be set manually.
+Zenitel Connect Pro can itself synchronize time with an external NTP server. If no NTP server is available, the system time can be set manually.
-Although it is possible to set a time zone, internally, Zenitel Connect Pro uses UTC time; all logs and times which are part of responses to API-calls are in UTC. The time zone setting is used to display correct local time and date on devices with a display.
+Although a time zone can be configured, Zenitel Connect Pro internally uses UTC. All logs and all timestamps included in API responses are generated in UTC. The configured time zone is used only to present the correct local date and time on devices equipped with a display.
 __TOC__