Difference between revisions of "EXECUTE COMMAND"

Revision as of 11:18, 18 January 2017

EXECUTE_COMMAND		0x004F
$X "ASCII Command string" @4 $X "RCO 2 ON" @3 $X 'MPP 2 0 "Alarm"'		Turn on RCO 2 in node 4 Send 'Alarm' to pocket pager 2 in node 3. (The @ node number is in HEX format.)
Send a command string to the exchange to be executed there. The command string can either be a DP message ($something), or an AMC built-in action (MPP). Application: - Activate built-in commands via AlphaNet, e.g. start paging in another node - A PC-based Call Handler can have user-configurable “scripts” in Simple Link Layer (ASCII) format which can be sent to the exchange using a reliable binary protocol. - “Super-RIO”: An external hardware unit with alarm inputs can be configured internally with actions identical to those used in RCI/Events. Just send them to the exchange for execution
1	UINT1[0...n]	String to be executed. Delimited by end of message. $X: If the string contains double quotes (“) they can be replaced by single (‘)

@@ Line 1: / Line 1: @@
+{{A}}
 {| border="1"
 |-