Difference between revisions of "AUDIO CH TONE REQ"
From Zenitel Wiki
Line 4: | Line 4: | ||
!style="background:#ffdead;" width="100pt"|0x8015 | !style="background:#ffdead;" width="100pt"|0x8015 | ||
!style="background:#ffdead;" width="30pt"|32789 | !style="background:#ffdead;" width="30pt"|32789 | ||
− | !style="background:#ffdead; | + | !style="background:#ffdead;" |AMC 07.00 |
|- | |- | ||
|colspan="5"|[[AlphaNet]]: Request a peer exchange to put a 500Hz tone on a audio channel. Used by the [[AGA]] input level adjustment function. The tone stays active for 3 minutes, or until switched off using [[AUDIO_CH_DISCON]].<br\>- Application: Send test tones for mux setup testing. Assume nodes 1 and 2, testing channel 4 in that link. | |colspan="5"|[[AlphaNet]]: Request a peer exchange to put a 500Hz tone on a audio channel. Used by the [[AGA]] input level adjustment function. The tone stays active for 3 minutes, or until switched off using [[AUDIO_CH_DISCON]].<br\>- Application: Send test tones for mux setup testing. Assume nodes 1 and 2, testing channel 4 in that link. |
Revision as of 16:46, 25 October 2007
AUDIO_CH_TONE_REQ | 0x8015 | 32789 | AMC 07.00 | |
---|---|---|---|---|
AlphaNet: Request a peer exchange to put a 500Hz tone on a audio channel. Used by the AGA input level adjustment function. The tone stays active for 3 minutes, or until switched off using AUDIO_CH_DISCON.<br\>- Application: Send test tones for mux setup testing. Assume nodes 1 and 2, testing channel 4 in that link.
In node 1, set up two Event Trigger feature dir.nos, and assign actions in Event Handler: <br\>Send tone from node 1: <2 $audio_ch_tone_req 4 <br\>Send tone from node 2: @2 $audio_ch_tone_req 4 | ||||
1 | UINT1 | Chanel number. |