Send Call Request Feature: Difference between revisions

Revision as of 20:29, 28 January 2008

Feature:	Send a Call Request
Default directory number:	622 - 628
Feature number:	73
Parameter 1:	0-255: Priority level
Description:	Call Request is a security feature where the calling station is queued on a display station. The called person can answer the call any time later. Procedure: 623 + directory number. The calling station is disconnected, and enters Call Requester Mode.

Additional information

Send a Call Request. Call Request is a SEND_MAIL with one of the Predefined AlphaCom mails number 17 or 18.

Param1 : Mail priority; for meaning see SEND_MAIL#Mail_priority. If priority >= 120 the predefined alarm message 17 is used, otherwise the normal predefined call request message 18 is used.

"Hide" off: Display user name. "Hide" on: Display CR name.

Back to feature list

@@ Line 10: / Line 10: @@
 |'''Parameter 1''': || 0-255: Priority level
 |-valign="top"
-|'''Description''': || Feature for adjusting [[AGA]] or [[AE1]] channels for [[MultiModule]] and [[AlphaNet]] links. To be used from display station.<br><br>
+|'''Description''': || [[Call Request]] is a security feature where the calling station is queued on a display station.  The called person can answer the call any time later.  <br>
-When installing AlphaNet or MultiModule audio links, each link can be adjusted by sending tones.
+Procedure:  623 + directory number.  The calling station is disconnected, and enters Call Requester Mode.
-<br>
-Procedure:  Dial 7872, then follow display menus.  Step to the line you want to adjust.  You hear tones sent alternating from own and remote exchange. The display shows something like "20-1 (4) 88-84" where:
-*20 is the AGA board position
-*1 is line number
-*(4) is potentiometer number
-*88 is tone level received from a remote exchange
-*84 is tone level sent from local exchange
-You always adjust the tone level of the received audio.  Adjust the level so that the two values are equal.
 |}
+===Additional information===
 Send a Call Request. Call Request is a [[SEND_MAIL]] with one of the [[Predefined AlphaCom mails]] number 17 or 18.
-Dial:  <dir.no> <destination station/group dir.no>.
 Param1 : Mail priority; for meaning see [[SEND_MAIL#Mail_priority]]. If priority >= 120 the predefined alarm message 17 is used, otherwise the normal predefined call request message 18 is used.

Send Call Request Feature: Difference between revisions

From Zenitel Wiki

Revision as of 20:29, 28 January 2008

Additional information