Difference between revisions of "IND - Indicator control for CRMIV LEDs, buzzer etc."
From Zenitel Wiki
(→Command syntax) |
|||
Line 130: | Line 130: | ||
| valign="top"|1 - 4 = Lamp outputs <br> 5 - 6 = Spare outputs <br> 7 = Cell light <br> 8 = Call LED | | valign="top"|1 - 4 = Lamp outputs <br> 5 - 6 = Spare outputs <br> 7 = Cell light <br> 8 = Call LED | ||
|valign="top" | Always "1" | |valign="top" | Always "1" | ||
− | |valign="top" | | + | |valign="top" |Output state: |
− | + | :1 = continuous <br> | |
− | :1 = | + | :2 = slow flash <br> |
− | :2 = | + | :3 = fast flash |
− | :3 = | ||
|valign="top" |ON or OFF | |valign="top" |ON or OFF | ||
|- | |- |
Revision as of 12:39, 21 August 2009
The IND (INDication) action is used in the Event Handler for sending commands to a station. The commands are sent as display data. The following stations are currently using the IND command:
- CRM IV: Control the LED's in the DAK keys, the internal buzzer or relay, and the backlight of the display
- DualDisplay station: Control the video-state of the DAK-display
- Priscom station: Control the outputs used for lamps, cell light, call LED and spare output
Command syntax
IND <station phys.no> <output> <LED no/buzzer> <Ind-type> [state]
Between the command parameters, there must always be a space.
Parameter description:
Parameter | CRM IV | DualDisplay | PrisCom |
---|---|---|---|
station phys.no | 1 - 552 = The physical number of the station | ||
output | 1-100 = The key number of the DAK-key 1023 = Buzzer 1024 = Display backlight |
1-100 = The DAK-line | 1 - 4 = Lamp outputs 5 - 6 = Spare outputs 7 = Cell light 8 = Call LED |
LED no/buzzer | DAK-key:
Buzzer:
Display backlight:
|
Always "1" | Always "1" |
Ind-type | DAK LED's:
Buzzers:
Display backlight:
|
Video-state of the DAK-display:
|
Output state:
|
[state] | ON or OFF (capital letters) |
Station/Parameter | phys.no | output | LED no/buzzer | IND-type | [state] |
---|---|---|---|---|---|
CRM V | Physical number 1 - 552 |
1-100 = DAK-key number 1023 = Buzzer 1024 = Display backlight |
DAK-key:
Buzzer:
Display backlight:
|
DAK LED's:
Buzzers:
Display backlight:
|
ON or OFF |
CRM IV | Physical number 1 - 552 |
1-100 = DAK-key number 1023 = Buzzer 1024 = Display backlight |
DAK-key:
Buzzer:
Display backlight:
|
DAK LED's:
Buzzers:
Display backlight:
|
ON or OFF |
DualDisplay | Physical number 1 - 552 |
1-100 = The DAK-key line | Always "1" | Video-state of the DAK-display:
|
ON or OFF |
PrisCom | Physical number 1 - 552 |
1 - 4 = Lamp outputs 5 - 6 = Spare outputs 7 = Cell light 8 = Call LED |
Always "1" | Output state:
|
ON or OFF |
The state parameter is optional. If nothing is entered in this field, the indication is switched on/off along with the event. By entering OFF, for example, you can set an indication to turn off when the event turns on.
Example
IND 2 23 2 3 ON = Station 2, key 23, turn green led, fast flashing, ON