Difference between revisions of "Output station lamp test feature"
From Zenitel Wiki
| Line 10: | Line 10: | ||
|'''Parameter 1''': || 0 (N/A) | |'''Parameter 1''': || 0 (N/A) | ||
|-valign="top" | |-valign="top" | ||
| − | |'''Description''': || Some Control Room stations based on the [[MPC Data Protocol]] can do a lamp test. This feature activates lamp test on own station. | + | |'''Description''': || Some Control Room stations based on the [[MPC Data Protocol]] can do a lamp test when receiving a certain data message from the exchange. This feature activates lamp test on own station. |
Procedure: Dial 7874. | Procedure: Dial 7874. | ||
Revision as of 20:53, 9 January 2008
| Feature: | Output "Station lamptest" MPC data message |
| Default directory number: | 7874 |
| Feature number: | 45 |
| Parameter 1: | 0 (N/A) |
| Description: | Some Control Room stations based on the MPC Data Protocol can do a lamp test when receiving a certain data message from the exchange. This feature activates lamp test on own station.
Procedure: Dial 7874. Data generated on the MPC Data Protocol:
When dialled on a CRM IV station, the LEDs goes ON for 5 seconds. |