Activate RCO output at remote station feature: Difference between revisions

Revision as of 17:08, 11 January 2008

58 FEAT_PULSE_PEER_RCO

Param1	Description
??	Activate Remote Control output at peer station
During connection: Generates event "Door Opening" on other station.

Feature:	Pocket Paging - With text message
Default directory number:	6 - during conversation
Feature number:	58
Parameter 1:	0 (N/A)
Description:	During conversation, dial 6 to operate an A station can activate the other station's remote control device (RCO) by pressing and releasing digit 6 during connection. If the station has remote control assigned, a success tone is given. The feature generates an event to the Event Handler, where the actual remote control takes place. The feature has timing so that the event is reported OFF after 3,5 seconds (programmable).

@@ Line 16: / Line 16: @@
 | Pocket Paging - With text message
 |-
-|'''Default directory number''': || 44 - during conversation
+|'''Default directory number''': || 6 - during conversation
 |-
-|'''Feature number''': || 57
+|'''Feature number''': || 58
 |-valign="top"
 |'''Parameter 1''': || 0 (N/A)
 |-valign="top"
-|'''Description''': || During conversation, dial 44 to activate the user’s [[Pocket_Paging|pocket pager]]. The station cancels when the paging is on air. The pager display will show the number of the calling station.
+|'''Description''': || During conversation, dial 6 to operate an
-|}
 A station can activate the other station's remote control device ([[RCO]]) by pressing and releasing digit 6 during connection.  If the station has remote control assigned, a success tone is given.  The feature generates an event to the [[Event Handler]], where the actual remote control takes place.  The feature has timing so that the event is reported OFF after 3,5 seconds (programmable).
+|}
 [[AlphaCom Feature List|Back to feature list]]