Actions

Difference between revisions of "Open / Private selection feature"

From Zenitel Wiki

Line 10: Line 10:
 
|'''Parameter 1''': || 0 = Open (7886)<br> 1 = Private (7887)
 
|'''Parameter 1''': || 0 = Open (7886)<br> 1 = Private (7887)
 
|-valign="top"  
 
|-valign="top"  
|'''Description''': || Feature code for setting the station in Open or Private mode. To use these codes, the station must first be enabled for this feature in AlphaPro, [[Users_%26_Stations_%28AlphaPro%29#User_Preferences|Users & Stations -> Station Type]] Programmable Open/Private.
+
|'''Description''': || Feature code for setting the station in Open or Private mode. To use these codes, the station must first be enabled for this feature in AlphaPro, [[Users_%26_Stations_%28AlphaPro%29#User_Preferences|Users & Stations -> Station Type]]: Programmable Open/Private.
 
<br>
 
<br>
 
Additional information:
 
Additional information:

Revision as of 15:16, 21 November 2008

Feature: Programmable Open/Private
Default directory number: 7886, 7887
Feature number: 80
Parameter 1: 0 = Open (7886)
1 = Private (7887)
Description: Feature code for setting the station in Open or Private mode. To use these codes, the station must first be enabled for this feature in AlphaPro, Users & Stations -> Station Type: Programmable Open/Private.


Additional information:

  • This feature is an alternative to mechanical PRIVATE switch
  • By default the Open/Private status is decided by the station hardware by means of a Open/Private switch on the station
  • As an alternative, a station can be forced in fixed Private mode by setting the flag Always Private in Users & Stations -> Station Type.


Back to feature list