Difference between revisions of "Start Tone Test (Line Monitoring) feature"
From Zenitel Wiki
| Line 15: | Line 15: | ||
This feature can be used independent of periodic tone test. | This feature can be used independent of periodic tone test. | ||
| + | |||
|} | |} | ||
| − | + | Note! The Tone Test feature is dependent of the Duplex Scanner in the subscriber board and is thus not supported in XE1 (or Audio Servers without ASLT/ATLB/ATLB12) | |
| − | Note! The Tone Test feature is dependent of the Duplex Scanner in the subscriber board and is thus not | ||
Revision as of 10:26, 5 December 2011
| Feature: | Start Tone Test |
| Default directory number: | 7885 |
| Feature number: | 90 |
| Parameter 1: | 0 (N/A) |
| Description: | Service: Run a Tone Test on all stations (2-5 minutes).
Line errors reported to the system log. This feature can be used independent of periodic tone test. |
Note! The Tone Test feature is dependent of the Duplex Scanner in the subscriber board and is thus not supported in XE1 (or Audio Servers without ASLT/ATLB/ATLB12)