Automatic M-key In Group Call: Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| Line 16: | Line 16: | ||
flag = 0 (off) 1 or 2 as described above. | flag = 0 (off) 1 or 2 as described above.<br\> | ||
group number = 1 - 100 | group number = 1 - 100 | ||
Automatic M-key is meant to be used on SIP or special non display stations. | Automatic M-key is meant to be used on SIP or special non display stations. | ||
Automatic M-key will on AlphaCom display stations show "wait" in second line of the display. | Automatic M-key will on AlphaCom display stations show "wait" in second line of the display. | ||
Back to [[Feature description]] | |||
[[Category: AlphaCom features]] | |||
Revision as of 05:15, 10 October 2007
Description
Each group can be configured to start audio without the need of M-key pres.
6 &003367 .ex_profile.group[1].flags = 1 (0x01)
Flags:<br\> 0 Regular group call behaviour. <br\> 1 will turn the Automatic M-key on for all stations initiating group call. <br\> 2 will turn it on only for SIP stations initiating group call. <br\>
Configuration from AlphaPro Event Handler: <br\> (Use System Status Event related to device 65 )
$SNV Q(flag) W1 W11 W(group number) W6
flag = 0 (off) 1 or 2 as described above.<br\>
group number = 1 - 100
Automatic M-key is meant to be used on SIP or special non display stations. Automatic M-key will on AlphaCom display stations show "wait" in second line of the display.
Back to Feature description