IP Substation Indication LEDs: Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| Line 2: | Line 2: | ||
== Station LED (on board and in front plate) == | == Station LED (on board and in front plate) == | ||
'''Blinking 1 sec. interval''': Station does not have connection to the AlphaCom E exchange. | '''Blinking 1 sec. interval''': Station does not have connection to the AlphaCom E exchange. | ||
''Possible reasons'': | :''Possible reasons'': | ||
* No connection to Ethernet | :* No connection to Ethernet | ||
* Wrong AlphaCom E IP address configured | :* Wrong AlphaCom E IP address configured | ||
* Invalid IP address | :* Invalid IP address | ||
* No or wrong gateway to the AlphaCom E exchange | :* No or wrong gateway to the AlphaCom E exchange | ||
'''Blinking 5 sec. interval''': Station has connection to the AlphaCom E exchange, but has not been registered. | '''Blinking 5 sec. interval''': Station has connection to the AlphaCom E exchange, but has not been registered. | ||
''Reason'': | :''Reason'': | ||
* Station has not been programmed in AlphaPro | :* Station has not been programmed in AlphaPro | ||
'''No blinking''' | '''No blinking''' | ||
''Possible reasons'': | :''Possible reasons'': | ||
* Station connected and registered to the AlphaCom E exchange - All OK | :* Station connected and registered to the AlphaCom E exchange - All OK | ||
* Station not powered up (if no other LEDs are active) | :* Station not powered up (if no other LEDs are active) | ||
== Status LED == | == Status LED == | ||
Revision as of 21:34, 10 October 2007
Station LED (on board and in front plate)
Blinking 1 sec. interval: Station does not have connection to the AlphaCom E exchange.
- Possible reasons:
- No connection to Ethernet
- Wrong AlphaCom E IP address configured
- Invalid IP address
- No or wrong gateway to the AlphaCom E exchange
Blinking 5 sec. interval: Station has connection to the AlphaCom E exchange, but has not been registered.
- Reason:
- Station has not been programmed in AlphaPro
No blinking
- Possible reasons:
- Station connected and registered to the AlphaCom E exchange - All OK
- Station not powered up (if no other LEDs are active)
Status LED
Blinking 2 red + 1 green Station does not have connection to the AlphaCom E exchange Blinking 1 red + 2 green Station has connection to AlphaCom E exchange, but has not been registered Blinking 3 green Station connected and registered in the AlphaCom E exchange LAN LEDs (on LAN and AUX RJ45-jacks): Left green LED: - Steady light Ethernet connection OK - Blinking Ethernet traffic - No light No Ethernet connection Right amber LED: - Light 100 Mbit Ethernet connection - No light 10 Mbit Ethernet connection