Difference between revisions of "CDC STATE"
From Zenitel Wiki
Line 26: | Line 26: | ||
9. ACTIVE_SYNC, first message/event from new A extension after CHANGE_A_IDENTITY, synchronize AMCD and ABSD with new message header<br> | 9. ACTIVE_SYNC, first message/event from new A extension after CHANGE_A_IDENTITY, synchronize AMCD and ABSD with new message header<br> | ||
10.TRUNK_BUSY, Reply when requested trunk is unavailable (reply to TRUNK_SET). <br> | 10.TRUNK_BUSY, Reply when requested trunk is unavailable (reply to TRUNK_SET). <br> | ||
− | 11.TRUNK_RINGING, Forwarded SIP reply ringing (reply to TRUNK_SET). | + | 11.TRUNK_RINGING, Forwarded SIP reply ringing (reply to TRUNK_SET). <br> |
12.TRUNK_SETUP_IN_PROGRESS, Forwarded SIP reply 100 "Trying" or 183 "in progress". | 12.TRUNK_SETUP_IN_PROGRESS, Forwarded SIP reply 100 "Trying" or 183 "in progress". | ||
|- | |- |
Revision as of 04:38, 6 July 2010
Related to Billing
CDC_STATE | 0x009E | 158 | AMC 10.40 | |
---|---|---|---|---|
Message used for billing control, from AMCD to ABSD CDC = Call Detail Control. Response is CDC_CMD. | ||||
1 | UINT2 | Connection Reference for this "dialing" sequence (actually ST_IND of A-station) | ||
2 | NET_OBJ_REF | A-station (billed station), in NRF_LOCAL_DIRNO format. | ||
3 | UINT1 | State of billing sequence. 1. START, user has initiated a feature requiring CDC (5 = feature dirno) | ||
4 | NET_OBJ_REF | Netref related to state type, (Feature, B-station or digit) |
Call Transfer and CDC_STATE Event
For the a Billed call transferred, AMCD will send :
- CDC_STATE(old_conn_ref; new_a_netref; CHANGE_A_IDENTITY) from the old node.
- CDC_STATE(new_conn_ref; new_a_netref; ACTIVE_SYNC) from the new node.
If the second message is not received with seconds, the transfer was unsuccessful.
Also see CALL_SETUP, param#3.
If the call is transferred to a station in an other node, the call will still be related to the original ABSD node. Even if the new node is configured to use an other ABSD node, or is not configured for billing at all.