Actions

Difference between revisions of "Recall"

From Zenitel Wiki

(ReCall user interface)
(ReCall user interface)
Line 18: Line 18:
 
# Press 8 to dispatch the message, M to do a new recording, 7 to hear again, or C to cancel
 
# Press 8 to dispatch the message, M to do a new recording, 7 to hear again, or C to cancel
  
# <nowiki>Dial access number to group (or 765 + <destination> + M-key)</nowiki>
 
# message recording. Choice of (possibly several times):
 
#* Pres '''M ('''<nowiki>* on phone) to record message.</nowiki>
 
#** If M is pressed again, recording is restarted
 
#* Release '''M''' (# on phone ) Recording stops, message is played back to user
 
#* '''C''' / '''on-hook''' to confirm and dispatch message. Return to Idle.  Messages shorter than 0.5 seconds are discarded.
 
#* '''8''' to confirm and dispatch message, stay active to hear the message being broadcasted
 
#* 0 delete recording, cancel
 
#* 7 to hear the message once again
 
  
 
===Hardware and software requiements===
 
===Hardware and software requiements===

Revision as of 13:42, 31 August 2010

Recall is a function to record a message from a station, and then dispatch the recorded message as a Group Call. The function is used to prevent feedback problems when making groupcalls. The recorded message is a temporary message, which is discarded when the Group Call is finished.

Default directory numbers for "recall" broadcast:

  • 9084: Recall to group 1 (all)
  • 9085-9088: Recall to groups 2 - 5

To initiate a group call, dial the directory number of the desired group. Press the M-key to start recording. Release M-key to listen to the message. Press 8 to dispatch the message, or C to cancel.

ReCall user interface

ReCall is a function to record a voice message from the station, and then dispatch the recorded message as a Group Call. The recorded message is a temporary message, which is discarded when the Group Call is finished. Simplest sequence is then:

  1. Dial recall number (e.g. 9084)
  2. Press M-key
  3. Record message
  4. Release M-key, and listen to the recording
  5. Press 8 to dispatch the message, M to do a new recording, 7 to hear again, or C to cancel


Hardware and software requiements

Hardware: The recall function can be used on all AMC-IP hardware versions (red or black PCB).

Software: Recall is available from AMC software version 11

License: Recall requires an Audio Messaging license.