Difference between revisions of "1-1a. Exchange startup (solution)"
From Zenitel Wiki
(→Coldstart) |
|||
| Line 15: | Line 15: | ||
*Press and hold the [[Autoload|coldstart]] button on the AMC-IP board | *Press and hold the [[Autoload|coldstart]] button on the AMC-IP board | ||
*Press the reset button on the power card briefly | *Press the reset button on the power card briefly | ||
| − | *Keep the cold start button pressed at least 2 sec. after reset | + | *Keep the cold start button pressed at least 2 sec. after reset |
| − | *The AMC status LED will blink green when the | + | *The AMC status LED will blink green when the system is up and running |
<br><br><br><br> | <br><br><br><br> | ||
Revision as of 15:55, 16 March 2011
Cards
Power
- Connect the power source to the plug on the back of the exchange, marked 24 VAC IN
- Connect the mains cable to the wall outlet
- Observe the exchange starting
Coldstart
- Press and hold the coldstart button on the AMC-IP board
- Press the reset button on the power card briefly
- Keep the cold start button pressed at least 2 sec. after reset
- The AMC status LED will blink green when the system is up and running