Difference between revisions of "INCA Video Desk Station LED Indicators"
From Zenitel Wiki
(Created page with "In the LCD display there is a bar color indicating the connection status: * '''<span style="color: Orange">Yellow</span>''' indicates that the IP Desktop Station is connected...") |
|||
| Line 1: | Line 1: | ||
| + | =Station LED= | ||
| + | LED4 - Red 5mm LED on board rear side, also seen through front plate. | ||
| + | [[File:IPDeskLED.png|left|thumb|200px|Station LED]] | ||
| + | <br style="clear:both;" /> | ||
| + | '''Blinking at 1 second intervals:'''<br/> | ||
| + | Station has no connection to the AlphaCom XE Audio Server. | ||
| + | |||
| + | Possible reasons: | ||
| + | * No connection to Ethernet | ||
| + | * Wrong AlphaCom IP address configured | ||
| + | * Invalid IP address | ||
| + | * No gateway or wrong gateway to the AlphaCom XE Audio Server | ||
| + | |||
| + | '''Blinking at 5 second intervals:'''<br/> | ||
| + | Station connected but NOT registered in the AlphaCom XE Audio Server. | ||
| + | |||
| + | Possible reasons: | ||
| + | * Station has not been programmed in AlphaPro | ||
| + | * Missing IP Station license in AlphaCom XE Audio Server | ||
| + | |||
| + | '''No blinking:''' | ||
| + | |||
| + | Possible reasons: | ||
| + | * Station connected and registered to the AlphaCom XE Audio Server | ||
| + | * Station not powered up (if no other LEDs are active) | ||
| + | |||
| + | =Display Color Bar= | ||
In the LCD display there is a bar color indicating the connection status: | In the LCD display there is a bar color indicating the connection status: | ||
* '''<span style="color: Orange">Yellow</span>''' indicates that the IP Desktop Station is connected to the server. | * '''<span style="color: Orange">Yellow</span>''' indicates that the IP Desktop Station is connected to the server. | ||
| Line 4: | Line 31: | ||
* '''<span style="color: Red">Red</span>''' indicates that no network connection can be established. If an Ethernet cable is connected the IP Video Display should connect automatically during start up. | * '''<span style="color: Red">Red</span>''' indicates that no network connection can be established. If an Ethernet cable is connected the IP Video Display should connect automatically during start up. | ||
* '''<span style="color: Orange">Yellow</span>-<span style="color: Red">Red</span>''' flashing indicates that no connection to the server can be established. If the server and the IP Desktop Station is configured correctly the connection is established automatically during start up. (May take some time) | * '''<span style="color: Orange">Yellow</span>-<span style="color: Red">Red</span>''' flashing indicates that no connection to the server can be established. If the server and the IP Desktop Station is configured correctly the connection is established automatically during start up. (May take some time) | ||
| + | |||
| + | [[Category:INCA Indication LEDs]] | ||
Revision as of 11:08, 26 October 2016
Station LED
LED4 - Red 5mm LED on board rear side, also seen through front plate.
Blinking at 1 second intervals:
Station has no connection to the AlphaCom XE Audio Server.
Possible reasons:
- No connection to Ethernet
- Wrong AlphaCom IP address configured
- Invalid IP address
- No gateway or wrong gateway to the AlphaCom XE Audio Server
Blinking at 5 second intervals:
Station connected but NOT registered in the AlphaCom XE Audio Server.
Possible reasons:
- Station has not been programmed in AlphaPro
- Missing IP Station license in AlphaCom XE Audio Server
No blinking:
Possible reasons:
- Station connected and registered to the AlphaCom XE Audio Server
- Station not powered up (if no other LEDs are active)
Display Color Bar
In the LCD display there is a bar color indicating the connection status:
- Yellow indicates that the IP Desktop Station is connected to the server.
- Green indicates an active, incoming or outgoing call.
- Red indicates that no network connection can be established. If an Ethernet cable is connected the IP Video Display should connect automatically during start up.
- Yellow-Red flashing indicates that no connection to the server can be established. If the server and the IP Desktop Station is configured correctly the connection is established automatically during start up. (May take some time)