Difference between revisions of "ENA Amplifier - Monitoring"
From Zenitel Wiki
(→Error reporting) |
(→Error reporting) |
||
| Line 28: | Line 28: | ||
* '''Fault Relay:''' The [[ENA2200_-_Mounting_and_Installation#Fault_Relay|Fault Relay]] on the back of the amplifier will trigger whenever there is an error. The relay will remain triggered as long as one or more errors are present. | * '''Fault Relay:''' The [[ENA2200_-_Mounting_and_Installation#Fault_Relay|Fault Relay]] on the back of the amplifier will trigger whenever there is an error. The relay will remain triggered as long as one or more errors are present. | ||
* '''Amplifier GUI display''': The [[ENA User Interface|Amplifier GUI display]] will indicate with a red exclamation mark if there are any errors. Use the Menu Selecetion Knob in front of the amplifier to navigate to '''Service''' > '''Local Message List''' to view current error messages | * '''Amplifier GUI display''': The [[ENA User Interface|Amplifier GUI display]] will indicate with a red exclamation mark if there are any errors. Use the Menu Selecetion Knob in front of the amplifier to navigate to '''Service''' > '''Local Message List''' to view current error messages | ||
| − | * '''Amplifier web interface''': [[ENA_Configuration_-_AlphaCom_mode#Status|Monitoring and Lines > Status]] | + | * '''Amplifier web interface''': In the Faults section in the [[ENA_Configuration_-_AlphaCom_mode#Status|Monitoring and Lines > Status]] menu there is a live update of current active faults. The page is automatically refreshed every 10 seconds. |
Revision as of 15:25, 5 April 2018
The ENA Amplifier provides extensive monitoring capabilities.
What is supervised?
Internal supervision of:
- Temperatures
- Internal voltages
- Amplifier shutdown
- Fan
- Software
External connections:
- Supply voltages (AC and/or DC)
- Ethernet port(s)
- Speaker Line (SLM) faults
- LET (Line End Transponder) faults
- Remote Control Input (RCI) faults
- Remote Control Output (RCO) faults
- Headphone disconnected
- Microphone fault
In the Monitoring and Lines tab, you can configure Speaker Line Monitoring, LET Monitoring, RCI and RCO monitoring and Line-In monitoring. This will report faults whenever there is something wrong with the amplifier or connected speaker lines.
Channel 1 is the main directory number for the amplifier. All monitoring is reported as an event at this directory number, with separate sub-events for each channel. All station faults that are configured to be reported will automatically show up in the System log of the AlphaCom server, and trigger Event 43 Station Fault Report, and the sub-event indicating what type of fault.
After configuring speaker line monitoring, the channel needs to be calibrated. This should not be done when there is a call active or audio on the speaker line. The option Suspend Monitoring will turn off monitoring when there is audio on the channel output.
Error reporting
- Fault Relay: The Fault Relay on the back of the amplifier will trigger whenever there is an error. The relay will remain triggered as long as one or more errors are present.
- Amplifier GUI display: The Amplifier GUI display will indicate with a red exclamation mark if there are any errors. Use the Menu Selecetion Knob in front of the amplifier to navigate to Service > Local Message List to view current error messages
- Amplifier web interface: In the Faults section in the Monitoring and Lines > Status menu there is a live update of current active faults. The page is automatically refreshed every 10 seconds.