Station Fault (Event Type)
From Zenitel Wiki
Event description
| Event Owner: | Station reporting the fault. |
| Event type: | 43 - Station Fault Report |
| Subevent: | Fault type, see list below |
| When change to ON: | When fault is active. |
| When change to OFF: | When fault is gone |
| When related to: | Fault description text returned in %2.nam |
If Subevent is set to 255, all fault types will be reported. One can use %sev to read the subevent number.
Fault types
| Subevent | Fault | Text returned from %2.nam |
| 0 | Any amplifier fault | Gen Fault |
| 1 | Any fault, Channel 1 | CH1 Fault |
| 2 | Any fault, Channel 2 | CH2 Fault |
| 3 | LET fault, Channel 1 | CH1 Let Fault |
| 4 | LET fault, Channel 2 | CH2 Let Fault |
| 5 | Amplifier shutdown, Channel 1 | CH1 Amp shutdown |
| 6 | Amplifier shutdown, Channel 2 | CH2 Amp shutdown |
| 7 | SLM faults, Channel 1 | CH1 Spk.li.fault |
| 8 | SLM faults, Channel 2 | CH2 Spk.li.fault |
| 9 | Over temperature, Channel 1 | CH1 Temp alarm |
| 10 | Over temperature, Channel 2 | CH2 Temp alarm |
| 11 | Cooling fan fault | Fan fault |
| 12 | Eth1 fault | ETH1 fault |
| 13 | Eth2 fault | ETH2 fault |
| 14 | Software fault | Software fault |
| 15 | AC power fault | AC fault |
| 16 | DC power fault | DC fault |
| 17 | EMBDR-8 missing | EMBDR fault |
| 18 | MIC fault | MIC fault |
| 19 | RCO Fault | RCO fault |
| 20 | RCI Fault | RCI fault |
Applications
Available from AMC 12.5.3.1.