Firewall (IP Stations): Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| Line 42: | Line 42: | ||
{{ | {{Note|VoIP port range is configurable from firmware 2.7 (INCA) and 4.7 (Turbine) when the station is in SIP mode.}} | ||
[[Category: Pulse - Configuration]] | [[Category: Pulse - Configuration]] | ||
[[Category: SIP intercom - Configuration]] | [[Category: SIP intercom - Configuration]] | ||
Revision as of 13:28, 18 September 2018
All IP Stations have an embedded firewall.
- Select Advanced Network > Firewall:
- SSH [Turbine only]: Enable or disable SSH on station, disabled by default.
- HTTP: Enable or disable HTTP on station, enabled by default.
- HTTPS: Enable or disable HTTPS on station, enabled by default.
- SIP (tcp) [Turbine only]: Enable or disable SIP over tcp on station, enabled by default.
- SIPS [Turbine only]: Enable or disable SIPS on station, enabled by default.
- Demo: Enable or disable DIP on station, disabled by default.
- DIP: Enable or disable DIP on station, enabled by default.
- TFTP Server: Enable or disable TFTP Server on station, enabled by default.
- SNMP: Enable or disable SNMP on station, enabled by default.
- SIP (udp): Enable or disable SIP over udp on station, enabled by default.
- Pulse: Enable or disable Pulse on station, enabled by default.
- mDNS: Enable or disable mDNS on station, enabled by default.
- DIP Multicast: Enable or disable DIP Multicast on station, enabled by default.
- Discovery: Enable or disable Discovery on station, enabled by default.
- Zap [Turbine only]: Enable or disable ZAP on station, enabled by default.
- ZapWeb [Turbine only]: Enable or disable ZapWeb on station, enabled by default.
- VoIP: Enable or disable VoIP on station, enabled by default.
|
VoIP port range is configurable from firmware 2.7 (INCA) and 4.7 (Turbine) when the station is in SIP mode. |