IP-LCM Connections: Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
For information on the [[TKIS Connections|TKIS-2 kit connections, see this link]] | |||
[[File:IPLCM.png|thumb|500px|right]] | [[File:IPLCM.png|thumb|500px|right]] | ||
Revision as of 14:45, 10 December 2018
For information on the TKIS-2 kit connections, see this link
Inputs
From the top left the inputs are numbered as pin 17 to pin 24. Each input has a corresponding input switch which toggles between closing contact and active input.
Outputs
From the left side the outputs are numbered as pin 17 to pin 24. Each output is a dual pole relay with normally open, normally close and common available on the pin header.
The bottom four outputs each has a corresponding switch. This allows forwarding power from the power forwarding connector to the relay normally open and common on each output.
Indicators
Each output has a LED which indicates if the output is active or not.