Difference between revisions of "ITSV-2 & ITSV-3 Restore Factory Defaults"
From Zenitel Wiki
m (Roarl moved page ITSV-3 Restore Factory Defaults to ITSV-2 & ITSV-3 Restore Factory Defaults) |
(→Hard reset) |
||
Line 19: | Line 19: | ||
==Hard reset== | ==Hard reset== | ||
+ | For users that want to do factory reset of the device manually, hard reset is an alternative: | ||
+ | ===ITSV-2=== | ||
+ | # Power cycle the ITSV-2. | ||
+ | #Wait for the LED in the upper right of the phone to light up in Green, then about 2 seconds later, press the both keys '''1''' and '''9'''' at the same time, it will go into the factory reset process. | ||
+ | #The LCD screen will display “Factory reset, please wait”. | ||
+ | #The ITSV-2 will reboot with factory default settings. | ||
− | + | ===ITSV-3=== | |
# Power cycle the ITSV-3. | # Power cycle the ITSV-3. | ||
#Wait for the LED in the upper right of the phone to light up in Green, then about 2 seconds later, press the both keys (the second LCD key from the left: Volume Up) and (the 4th LCD key from the left: Menu) at the same time, it will go into the factory reset process. | #Wait for the LED in the upper right of the phone to light up in Green, then about 2 seconds later, press the both keys (the second LCD key from the left: Volume Up) and (the 4th LCD key from the left: Menu) at the same time, it will go into the factory reset process. |
Revision as of 12:55, 20 May 2021
This article describes how to restore factory defaults of the ITSV-3 station.
Restoring the Factory Default Settings will delete all configuration information on the phone. Please backup or print all the settings before you restore to the factory default settings. |
Restore to Factory Default via LCD Menu
- Select the Settings icon on the screen, and scroll down to the Advanced section. Select System security > Factory reset
Restore to Factory Default via the Web interface
- Login to ITSV-3 Web GUI and go to Maintenance > Upgrade page
- Under the Advanced Settings tab, select Factory Reset.
Hard reset
For users that want to do factory reset of the device manually, hard reset is an alternative:
ITSV-2
- Power cycle the ITSV-2.
- Wait for the LED in the upper right of the phone to light up in Green, then about 2 seconds later, press the both keys 1 and 9' at the same time, it will go into the factory reset process.
- The LCD screen will display “Factory reset, please wait”.
- The ITSV-2 will reboot with factory default settings.
ITSV-3
- Power cycle the ITSV-3.
- Wait for the LED in the upper right of the phone to light up in Green, then about 2 seconds later, press the both keys (the second LCD key from the left: Volume Up) and (the 4th LCD key from the left: Menu) at the same time, it will go into the factory reset process.
- The LCD screen will display “Factory reset, please wait”.
- The ITSV-3 will reboot with factory default settings.
Factory default values
- Station IP address: DHCP
- Username: admin
- Password: alphaadmin
The very first time you log in via the web interface you are prompted to change the password.