Zenitel Client USB Control Button

Overview

Zenitel Client can also be controlled by an optional external USB button.

This button is connected to a USB port on the PC and all necessary software drivers are automatically installed.

Actions on the button are detected by the Zenitel Client as long as the application is running and is not dependent on the application having focus.

Actions and States

While there is an incoming call (VS-Client is ringing)

This is the behavior when VS-Client is in Private mode.

• The button will flash yellow.
• Press the button once to accept the call.
• Press the button twice to reject and terminate the call.

While there is an ongoing call

• The button will flash green while call is ringing (called station is in Private mode).
• The button will light green during an ongoing call.
• Press and hold the button to go into “talking” mode - the button will light red.
• Release the button to go into "listening" mode - the button will light green.
• Press the button twice to terminate the call - the button will flash red.
• Press the button thrice to revert the conversation back to "duplex" mode

While there is no ongoing call

• Press the button twice to re-establish the last active call.
• Press the button thrice to open the VS-Client GUI - the button will flash blue.