Difference between revisions of "Grandstream HandyTone-488"
From Zenitel Wiki
(→Configuration of AlphaCom E) |
ZenitelAus (talk | contribs) |
||
| Line 1: | Line 1: | ||
{{A}} | {{A}} | ||
| + | {{Obs|This product is obsolete. Refer to [https://wikitest.zenitel.com/wiki/Grandstream_HT801 Grandstream HT801]}} | ||
[[Image:Handy Tone.jpg|right|500px|thumb]] | [[Image:Handy Tone.jpg|right|500px|thumb]] | ||
*HandyTone-488 is an Analog Telephone Adapter (ATA) with one FXS port | *HandyTone-488 is an Analog Telephone Adapter (ATA) with one FXS port | ||
Latest revision as of 04:34, 25 March 2022
|
This product is obsolete. Refer to Grandstream HT801 |
- HandyTone-488 is an Analog Telephone Adapter (ATA) with one FXS port
- If HandyTone-488 loose power, registration or network, you get pass-through from telephone to PSTN (FXO port)
- The LAN port has default IP address 192.168.2.1
- Connect a PC directly to this port – the DHCP server will assign IP address to the PC
- Login with password admin
- Enable ”WAN side http access” in Advanced Settings
- Do an update and reboot!
- The WAN port is then connected to the AlphaCom Ethernet port directly or on the same LAN as the AlphaCom
- Administration of the HandyTone can then be done from the WAN side also
- Set WAN IP address in Basic Settings
- FXS Port settings
- - SIP Server: Equal to the AlphaCom IP address
- - Outbound Proxy: Equal to the AlphaCom IP address
- - User ID: Equal to the Directory Number in AlphaPro
- - Enable ”User ID is phone number” and “SIP registration”
- FXS Port settings
- -Set preferred codec to be “PCMU” (G711μlaw) on all choices:
Configuration of AlphaCom E
The AlphaCom E needs to be configured with a SIP registrar node.