Difference between revisions of "MAC address (ICX and AlphaCom servers)"
From Zenitel Wiki
| Line 1: | Line 1: | ||
| − | Each of the two ethernet ports | + | {{AI}}Each of the two ethernet ports in the ICX-500 or in the AlphaCom XE has an unique [http://en.wikipedia.org/wiki/MAC_address MAC address]. Zenitel has a MAC address range from 00:13:CB:00:00:00 to 00:13:CB:FF:FF:FF. |
| − | + | This MAC address is used by ethernet port 0 (Eth0). The MAC address of ethernet port 1 (Eth1) is generated by adding 80:00:00. | |
| − | It is always the MAC address of Eth0 which is | + | It is always the MAC address of Eth0 which is refereed to when dialing [[Station ID feature|789]] on a display station, and in [[AlphaWeb]], ’System Monitoring > Node information' and in 'System Configuration > License key'. |
The MAC address of Eth1 is found in 'System Configuration > Interfaces'. | The MAC address of Eth1 is found in 'System Configuration > Interfaces'. | ||
| − | If the MAC address is to be used for instance for firewall rules, it is important to provide the IT- | + | If the MAC address is to be used for instance for firewall rules, it is important to provide the IT-administrator with the correct MAC address. |
[[Category:AMC Software]] | [[Category:AMC Software]] | ||
Revision as of 08:13, 11 May 2022
Each of the two ethernet ports in the ICX-500 or in the AlphaCom XE has an unique MAC address. Zenitel has a MAC address range from 00:13:CB:00:00:00 to 00:13:CB:FF:FF:FF.
This MAC address is used by ethernet port 0 (Eth0). The MAC address of ethernet port 1 (Eth1) is generated by adding 80:00:00.
It is always the MAC address of Eth0 which is refereed to when dialing 789 on a display station, and in AlphaWeb, ’System Monitoring > Node information' and in 'System Configuration > License key'. The MAC address of Eth1 is found in 'System Configuration > Interfaces'.
If the MAC address is to be used for instance for firewall rules, it is important to provide the IT-administrator with the correct MAC address.