Automatic M-key In Group Call

A Group Call can be configured to start audio without the need of pressing the M-key. This is configurable for each individual group. The setting is available from AlphaPro.

From the TST console

TST>>nvram - ex_profile.group[1].flags = 1 (0x01)

Flags:
0 = Regular group call behaviour, e.g. M-key must be pressed to open the audio path
1 = Automatic M-key for all stations initiating the group call
2 = Automatic M-key when SIP stations are initiating the group call

Configuration from Event Handler

Enable automatic M-key for group 3 (86) when called from SIP

The System Status Event related to device 65 will be triggered when the AlphaCom starts up. Use the following action string:

$SNV Q(flag) W1 W11 W(group number) W6

flag = 0, 1 or 2 as described above
group number = 1 - 100

The programming will take effect after a reset of the exchange.

Additional information

• Automatic M-key is meant to be used on SIP or special non display stations.
• Automatic M-key will on AlphaCom display stations show "wait" in second line of the display.
• Require AMC software 10.30 or later
  
  

Back to Feature description