Difference between revisions of "Blind Transfer During Connection"
From Zenitel Wiki
(→Description) |
|||
| Line 2: | Line 2: | ||
[[Image:BlindTransfer2.PNG|thumb|200px|Blind Transfer feature]] | [[Image:BlindTransfer2.PNG|thumb|200px|Blind Transfer feature]] | ||
== Description == | == Description == | ||
| + | Blind Transfer is a variant of the standard [[Call Transfer]]. | ||
*Press 2 during conversation to put the station on hold, the station on hold will receive a busy signal | *Press 2 during conversation to put the station on hold, the station on hold will receive a busy signal | ||
*Dial the directory number of the third station or an idle feature code. | *Dial the directory number of the third station or an idle feature code. | ||
Latest revision as of 09:37, 24 May 2022
Description
Blind Transfer is a variant of the standard Call Transfer.
- Press 2 during conversation to put the station on hold, the station on hold will receive a busy signal
- Dial the directory number of the third station or an idle feature code.
- Station on hold will connect to the feature dialed and disconnect yourself.
Blind Transfer (feature 55/1) is not included in Factory Default. To enable digit "2" for Blind Transfer, modify the parameter 1 as indicated in the screen shot below.
This extends the transfer feature to also give the possibility to do transfer to:
- Stations in private
- Ringing groups
- SIP phones
- Group call
- ++
See also Call Transfer