Revision as of 13:50, 3 October 2024

This document provides the release notes for VSFF8MP 9.0 with incremental bug fix releases. The release notes for VSF-Fortitude8 9.0 describe new features, improvements and issues fixed after vsff8mp-8.3.3.2.

Release info

Name: VSF-Fortitude8
Description: vsff8mp is a firmware for Zenitel display series including the following devices: ZMK-1, ZDD-1

The firmware is delivered in two different files:

vsff8mp-9.0.3.x - Used for standard in-field upgrades
vsff8mp-prod-9.0.3.x - Used in production- and recovery upgrades.

Version: 9.0.3.0
Date: 03.10.2024
Status: General Availability

VSFF8MP 9.0.3.0

Improvements

MTN-4397 Improved certificate handling, and split SIP and HTTPS certificates into separate pages

Split SIP and HTTPS certificates into separate pages, removed turbine_server_sha1.key private key and TLS Private Key option, added factory reset handling, added backup and recovery for SIP certificates, fixed certificate regeneration on some devices, removed private keys from the device web page.

MTN-3557 New configuration option for RTSP Audio Source

There’s a new option for configuring RTSP Audio Source, “Mixed signal”. This option mixes far and near end signal.

DS-1034 Added support for codec L16x48 to Multicast Paging config

Devices can now listen to raw PCM 48 kHz audio stream (L16x48) when configured in HD-Audio mode.

DS-970 Added multicast relay feature

Device can now relay incoming RTP to specified address and port.

DS-928 Extended characters for virtual Call Button entries

This is now allowing up to 255 characters and also special symbols such as @ that are allowed in sip invite.

Fixed Issues

MTN-4575 Removed required “Number” in Address Book when a “Ringlist” is selected

Fixed a problem where selecting a “Ringlist” in an Address Book entry required a “Number” to be present.

MTN-4563 Changing zoom setting caused video to stop working and device reboot

When user changed video zoom setting from default one and rebooted device would get into reboot loop with video not working. Factory reset would had resolved it. This is now fixed.

DS-1015 Permanent Audio Stream fixes and config refresh

Some parts of the audio stream config was not working correct and mic level was very low. Also linked to RTSP “Audio Source” config for impact which signal is sent to RTP stream. Consult wiki documentation for more details.

@@ Line 34: / Line 34: @@
 ==Fixed Issues==
-=== MTN-4435 RTSP stream could stop in some cases===
+===MTN-4575 Removed required “Number” in Address Book when a “Ringlist” is selected===
-In case of audio issues, RTSP stream would terminate. Now the stream will continue with a moment of silence instead.
+Fixed a problem where selecting a “Ringlist” in an Address Book entry required a “Number” to be present.
-=== MTN-4394 Multicast paging working again on intercom devices===
+===MTN-4563 Changing zoom setting caused video to stop working and device reboot===
-Multicast paging was not working on intercom devices when configuring from the webpage. This is now fixed.
+When user changed video zoom setting from default one and rebooted device would get into reboot loop with video not working. Factory reset would had resolved it. This is now fixed.
-=== MTN-4362 Fixed wrong description in Sound Detection settings===
+===DS-1015 Permanent Audio Stream fixes and config refresh===
+Some parts of the audio stream config was not working correct and mic level was very low. Also linked to RTSP “Audio Source” config for impact which signal is sent to RTP stream.
-The description of “Minimum time before reactivation” is corrected to
+Consult wiki documentation for more details.
-“Choose how long to wait before enabling VAD after triggering the DAK key”
-Note! This max level is loud and intended for use on heavy noisy environments and when using additional protective ear-plugs.
-=== MTN-4228 Turbine devices could not be used with Bosch VMS===
-There was a problem on Zenitel ONVIF devices that caused software to crash and device to reboot which made Bosch VMS unable to connect to the device.

Difference between revisions of "VSF-Display Series 9.0 Release Notes"

From Zenitel Wiki