DISPLAY TEXT

DISPLAY_TEXT		0x005A	90	AMC 06.00
$DSPL L101 U18 0311 ‘Line 1 text’<br\> $DSPL L101 U18 0312 ‘Line 2 text’<br\> $DSPL L104 U23 0313 14 "Line 3 text on CRM "<br\> $DSPL L104 U23 0313 54 "Line 4 text on CRM "<br\> Dual Display (from AMC 08.28 / 09.01):<br\> 1. $DSPL L104 U11 33011302 ‘DAK line’<br\> 2. $DSPL L104 U3 500400 ‘’<br\> <br\> IP station Custom Command (From AMC 10.30)<br\> $DSPL L101 U4 60AB0812 ‘’ > DIP message IP station Custom Command (DIP) LINE 1: $DIP N%1.phy "dite 1 1 0 0 8 TEXT" LINE 2: $DIP N%1.phy "dite 1 1 0 0 17 TEXT" LINE 3: $DIP N%1.phy "dite 1 1 0 0 26 TEXT" LINE 4: $DIP N%1.phy "dite 1 1 0 0 35 TEXT" Explanation: <ref> dite <disp> <font_> <flags> <posx> <posy> <text> ref: Physical number for addressed station. disp: Display number. 1 = Main display (size 128x64 pixels). 2 = Dak display. font_: Font type 1 = 5x8 (horizontal spacing +1 pixel = 6 pixels width). 2 = 8x15 (horizontal spacing included). 3 = 10x16 (horizontal spacing +2 pixels = 12 pixels width). flags: Flags 0001 = Inverted. posx: Horizontal position from left to right. Denotes left edge position of first character. Hex value (Main display: 00-7F = 128 pixels) posy: Vertical position from top to bottom. Denotes top edge position of first character. Hex value (Main display: 00-3F = 64 pixels) text: Display text coded as UTF-8
Send text and control characters to a station in a station dependent low level format.<br\> The character set is ISO 8859 (for characters from 20 hex and above). The control characters used conforms to the TouchLine display format code for control of the display.<br\> AlphaNet: Message from remote exchange in order to display the enclosed text in a local station.<br\><br\> Note 1: The exchange updates the display frequently, and external control of the display will work only in special situations Note 2: The text must be within apostrophes ('....') and not closing single quotation marks (‘…’) . The text editor Word (and others) tends to convert apostrophes to single quotation marks, which will not work.<br\><br\> Dual Display:<br\> Example 1. Update text on DAK display line 02. legal values 01->64 (1-100 decimal)<br\> Example 2. Select (show) DAK page 04 on DualDisplay station with no arrow indication (last 00. Arrow down is visible if (last) number is 2 or more. Arrow up is visible if number is larger than the page number).
1	NET_OBJ_REF<br\>{ECL_STATION}	Station displaying text.<br\>AlphaNet: B station in B exchange.<br\> Null value not allowed.
2	UINT1	Length of text
3	Array of UINT1	Text characters.

Back to AlphaNet message list