Difference between revisions of "O DUPL CONF"
From Zenitel Wiki
| Line 26: | Line 26: | ||
||AMC 08.00 | ||AMC 08.00 | ||
|- | |- | ||
| − | colspan="2"|Response:||colspan="3"|[[COMMAND_RESPONSE]] <br\> | + | |colspan="2"|Response:||colspan="3"|[[COMMAND_RESPONSE]] <br\> |
Parameter 3: Station individ (physical no) for station concerned. | Parameter 3: Station individ (physical no) for station concerned. | ||
|- | |- | ||
|} | |} | ||
Revision as of 15:00, 12 June 2007
| O_DUPL_CONF | 0x006F | 111 | AMC 07.20 | |
|---|---|---|---|---|
| $ODC L101 L8301 | ||||
| Include/exclude a station or a group into/from an Open Duplex Conference. | ||||
| 1 | NET_OBJ_REF <br\> {ECL_USER,<br\> ECL_STATION,<br\> ECL_ST_GROUP} | User, station or group. | ||
| 2 | NET_OBJ_REF<br\> {ECL_O_DUPL_CONF} | The Open Duplex Conference.<br\>
- Null value means that the representation of the first parameter is excluded from the conference which it currently participates. | ||
| 3 | UINT1<br\>(optional) | Call mode. Modus for use of function. <br\> 1 = Include/exclude according to parameter 2. (default)<br\>
2 = Toggle in or out of conference depending on current state |
AMC 08.00 | |
| 4 | UINT1<br\>(optional) | Priority to force station into conference if busy <br\> 0 = Low<br\>
1 = Medium<br\> 2 = High<br\> 3 = Alarm<br\> Default: The setup priority of the conference identified with parameter 2. |
AMC 08.00 | |
| Response: | COMMAND_RESPONSE <br\>
Parameter 3: Station individ (physical no) for station concerned. | |||