Difference between revisions of "External Data Input"

Revision as of 15:34, 17 July 2007

Event description

Event Owner:	EDI Text Config
Event type:	External Data Input
Sub-Event:	1 – 4: specifies which EDI port. 0: matches all ports
When Change to ON:	When valid data is received on EDI port
When Change to OFF:	N/A
When Related to:	N/A

Input message

- The EDI port is defined in the ‘Serial Ports’ Setup

- The input message must have a termination character. Max 128 char.

- Parsing the content is done in the action string

Context parameters

- %edi is the input text where termination character is excluded

- %sev is the EDI port (sub-event)

Useful macros and statements

%scutc - Extract substring by byte (character) position
%scutf - Extract field, fields defined by delimiter character
%sscan - Scan for string, extract rest of string after first match
%scmp - Compare strings
TMP - Set temporary variable
%tmp - Read temporary variable

Example

The rule below will allow you to issue commands to EDI port like this:

connect,101,103

-Generates internal command $CALL L101 L103

disconnect,101,103

-Generates internal commands $C L101and $C L103

evh add edi 0
tmp 0 "%scutf(%edi,\,,0)"
tmp 1 "%scutf(%edi,\,,1)"
tmp 2 "%scutf(%edi,\,,2)"
if %scmp(%tmp(0),connect)
 $call l%tmp(1) l%tmp(2)
 stop
endif
if %scmp(%tmp(0),disconnect)
 $c l%tmp(1)
 $c l%tmp(2)
 stop
endif

@@ Line 21: / Line 21: @@
 |-
 |}
 *Input message
@@ Line 28: / Line 29: @@
 *Context parameters
-:- %edi is the input text where termination character is excluded
+:- [[Edi (macro)|%edi]] is the input text where termination character is excluded
-:- %sev is the EDI port (sub-event)
+:- [[%sev]] is the EDI port (sub-event)
-*Operator macros
-:- %scutc(string,start-pos,lenght)
-::* Extract substring by byte (character) position
-::* Example: %scutc(0123456789,2,3) returns 234
-::* Example: %scutc(%edi,4,3) returns 3 characters from the input string, starting from char 5
-:- %scutf(string, delimiter, field-no)
-::* Extract field, fields defined by delimiter character
-::* delimiter is a single char, possibly escaped.  Example: Tab= \t  ‘,’ = \,
-::* Optionally followed by + sign to indicate that more than one delimiter character is allowed between fields
-::* field-no is a integer number, counting starts from zero!
-::* Example: %scutf(%edi, +,3) extract field number 3; fields separated by any number of spaces
-::* Example: %scutf(%edi,\,,3)extract field number 3; fields separated by commas
-:- %sscan(string, search-string)[[Image:EDI - External Data Input (3).jpg|thumb|right|500px]]
+*Useful macros and statements
-::* Scan for string, extract rest of string after first match
+:* [[%scutc]] - Extract substring by byte (character) position
-::* Example: If %sscan(%edi,connect) Check if text has the string “connect”
+:* [[%scutf]] - Extract field, fields defined by delimiter character
+:* [[%sscan]] - Scan for string, extract rest of string after first match
+:* [[%scmp]]  - Compare strings
+:* [[Tmp_statement|TMP]]  - Set temporary variable
+:* [[%tmp]]  - Read temporary variable
-:- %scmp(string1,string2)
-Compare strings. Return “1” if equal, empty string if not
-*Temporary variables
+== Example ==
-:-Temporary variables (strings), numbered 0 to 9
+[[Image:EDI - External Data Input (3).jpg|thumb|right|500px]]
-:-Lives only within the action string
-:-Set temporary variable:      TMP 0 "<string>"
-:-Read temporary variable:  %tmp(0)
-*The rules below will allow you to issue commands to EDI port like this:
+The rule below  will allow you to issue commands to EDI port like this:
 *connect,101,103
-:-Generates internal <br\>command $CALL <br\>L101 L103
+:-Generates internal command '''$CALL L101 L103'''
 *disconnect,101,103
-:-Generates internal <br\>command $C L101 <br\>and $C L103
+:-Generates internal commands '''$C L101'''and '''$C L103'''
+ evh add edi 0
+ tmp 0 "%scutf(%edi,\,,0)"
+ tmp 1 "%scutf(%edi,\,,1)"
+ tmp 2 "%scutf(%edi,\,,2)"
+ if %scmp(%tmp(0),connect)
+  $call l%tmp(1) l%tmp(2)
+  stop
+ endif
+ if %scmp(%tmp(0),disconnect)
+  $c l%tmp(1)
+  $c l%tmp(2)
+  stop
+ endif

Difference between revisions of "External Data Input"

From Zenitel Wiki

Revision as of 15:34, 17 July 2007

Event description

Example