Difference between revisions of "Start Alarm message at station feature"

Revision as of 16:32, 25 January 2008

Feature:	Alarm Message to Station
Default directory number:	8190 - 8199
Feature number:	67
Parameter 1:	1-9 = Alarm message number. 0 = Alarm Off
Description:	Start playback of alarm message at own station by dialling the alarm number. The alarm message is switched off by dialling 8190. The feature require ASVP board. This feature is normally used together with the feature code 761 for Remote setup of Alarm message. Alarm messages can also be triggered from the Event Handler or RCI by using the commands AMS or AMG, or the AlphaCom Data Protocol command $ALRM

@@ Line 14: / Line 14: @@
 *This feature is normally used together with the feature code 761 for [[Remote setup of Alarm message feature|Remote setup of Alarm message]].
-*Alarm message can also be triggered from the [[Event Handler]] or [[RCI]] by using the commands [[AMS]] or [[AMG]], or the [[ACDP|AlphaCom Data Protocol]] command $[[ALRM]]
+*Alarm messages can also be triggered from the [[Event Handler]] or [[RCI]] by using the commands [[AMS]] or [[AMG]], or the [[ACDP|AlphaCom Data Protocol]] command $[[ALRM]]
 |}