Difference between revisions of "MAC address (ICX and AlphaCom servers)"
From Zenitel Wiki
| Line 1: | Line 1: | ||
| − | Each ethernet interface must have an unique [http://en.wikipedia.org/wiki/ MAC_address]. Zenitel has a MAC address range from 00:60:35:00:00:00 to 00:60:35:ff:ff:ff. | + | Each ethernet interface must have an unique [http://en.wikipedia.org/wiki/MAC_address MAC_address]. Zenitel has a MAC address range from 00:60:35:00:00:00 to 00:60:35:ff:ff:ff. |
Every [[AMC-IP]] board has a mac-chip with a MAC address used by ethernet port 0 (Eth0). The MAC address of ethernet port 1 (Eth1) is generated by adding 80:00:00. | Every [[AMC-IP]] board has a mac-chip with a MAC address used by ethernet port 0 (Eth0). The MAC address of ethernet port 1 (Eth1) is generated by adding 80:00:00. | ||
Revision as of 12:09, 7 January 2008
Each ethernet interface must have an unique MAC_address. Zenitel has a MAC address range from 00:60:35:00:00:00 to 00:60:35:ff:ff:ff. Every AMC-IP board has a mac-chip with a MAC address used by ethernet port 0 (Eth0). The MAC address of ethernet port 1 (Eth1) is generated by adding 80:00:00.
It is always the MAC address of Eth0 which is refered to in AlphaWeb, ’System Monitoring > Node information' and in 'System Configuration > License key'. The MAC address of Eth1 is found in 'System Configuration > Interfaces'.
If the MAC address is to be used for instance for firewall rules, it is important to provide the IT-adminstrator with the correct MAC address.