Difference between revisions of "NVRAM version"
From Zenitel Wiki
| Line 3: | Line 3: | ||
E.g. an upgrade from version 10.50 to 10.60.3.14 will keep the configuration, but an upgrade from 10.30 to 10.60.3.14 will set the configuration to factory defaults. | E.g. an upgrade from version 10.50 to 10.60.3.14 will keep the configuration, but an upgrade from 10.30 to 10.60.3.14 will set the configuration to factory defaults. | ||
| − | When upgrading the AMC software to a version with different NVRAM version, one MUST do a GetAll from AlphaPro first, then upgrade the software, | + | When upgrading the AMC software to a version with different NVRAM version, one MUST do a GetAll from AlphaPro first, then upgrade the software, followed by a SendAll from AlphaPro. |
{| border="1" | {| border="1" | ||
Revision as of 19:56, 23 February 2011
When upgrading the AMC software and the NVRAM versions are different, the running intercom (AMCd) configuration will automatically be deleted and factory default settings will be loaded.
E.g. an upgrade from version 10.50 to 10.60.3.14 will keep the configuration, but an upgrade from 10.30 to 10.60.3.14 will set the configuration to factory defaults.
When upgrading the AMC software to a version with different NVRAM version, one MUST do a GetAll from AlphaPro first, then upgrade the software, followed by a SendAll from AlphaPro.
| NVRAM version | AMC software | Additional info |
|---|---|---|
| 10.50 | 10.50 - 10.60.3.14 | |
| 10.30 | 10.30 - 10.43 | |
| 10.20 | 10.20 - 10.22 | |
| 10.00 | 10.00 - 10.05 | |
| 09.01 | 09.01 - 09.15 | |
| 08.27 | 08.27 - 08.30 | |
| 08.26 | 08.26 | |
| 08.00 | 08.01 - 08.25 | |
| 07.20 | 07.20 - 07.63 | |
| 07.01 | 07.01 - 07.18 | |
| 06.00 | 06.00 - 06.06 | |
| 05.07 | 05.07 - 05.10 | |
| 05.00 | 05.00 - 05.06 |
See also: