Difference between revisions of "Blind Transfer During Connection"
From Zenitel Wiki
(New page: == Description == The original AlphaCom is only capable of doing transfere after an successfull inquiry to another station during connection. This means if no answare during inquiry it is...) |
|||
| Line 1: | Line 1: | ||
| − | |||
== Description == | == Description == | ||
The original AlphaCom is only capable of doing transfere after an successfull inquiry to another station during connection. This means if no answare during inquiry it is not possible to transfere the call to a private ringing station or a ringing group. | The original AlphaCom is only capable of doing transfere after an successfull inquiry to another station during connection. This means if no answare during inquiry it is not possible to transfere the call to a private ringing station or a ringing group. | ||
| Line 11: | Line 10: | ||
== Software Operation == | == Software Operation == | ||
A calls B, and B activate direct transfer to C | A calls B, and B activate direct transfer to C | ||
| − | * B activate Direct transfere during connection. A and B "CONN" agent is parked. A gets on hold tone, B is in collect digit state. | + | * B activate Direct transfere during connection. A and B -"CONN" agent is parked. A gets on hold tone, B is in collect digit state. |
* B collect digits until an available feature during connection match is found in the directory table. | * B collect digits until an available feature during connection match is found in the directory table. | ||
| − | * B sends the directory number collected to its own "CONN" agent, B agent send the directory number to A "CONN" agent, that will forward the number to A-"SBS". | + | * B sends the directory number collected to its own "CONN" agent, B-agent send the directory number to A-"CONN" agent, that will forward the number to A-"SBS". |
* A- "SBS" will disconnect the current call and activate the received directory number. (B-will disconnect) | * A- "SBS" will disconnect the current call and activate the received directory number. (B-will disconnect) | ||
| + | |||
| + | A calls B, and A activate direct transfer to C and B is a SIP connection. | ||
| + | |||
| + | * A activate Direct transfere during connection. A-"REM_CONN" agent is parked. | ||
| + | * A collect digits until an available feature during connection match is found in the directory table. | ||
| + | * A sends the directory number collected to its own "REM_CONN" agent, B-agent send the directory number to B-"SBS", | ||
| + | * B- "SBS" will | ||
Revision as of 11:48, 21 July 2008
Description
The original AlphaCom is only capable of doing transfere after an successfull inquiry to another station during connection. This means if no answare during inquiry it is not possible to transfere the call to a private ringing station or a ringing group.
Direct transfer is based on the Inqury during connection feature (55). Configuring Inquiry with parameter 1 = 1 will activate transfere directly to the feature directory number dialed during Inquiry. This extend the transfer feature to also give the possibility to do transfere to:
- Stations in private.
- Ringing groups
- Group call
- ++
Software Operation
A calls B, and B activate direct transfer to C
- B activate Direct transfere during connection. A and B -"CONN" agent is parked. A gets on hold tone, B is in collect digit state.
- B collect digits until an available feature during connection match is found in the directory table.
- B sends the directory number collected to its own "CONN" agent, B-agent send the directory number to A-"CONN" agent, that will forward the number to A-"SBS".
- A- "SBS" will disconnect the current call and activate the received directory number. (B-will disconnect)
A calls B, and A activate direct transfer to C and B is a SIP connection.
- A activate Direct transfere during connection. A-"REM_CONN" agent is parked.
- A collect digits until an available feature during connection match is found in the directory table.
- A sends the directory number collected to its own "REM_CONN" agent, B-agent send the directory number to B-"SBS",
- B- "SBS" will