Pocket Pagers (AlphaPro)

The Pocket Pagers button

Pocket Pager Settings tab

• Pager number: An internal index 1-600. It links users to pagers, and for Direct Paging directory numbers it is the feature ID

• Description: The text you enter here is displayed in the listbox to the left. Note that this text is not transferred to the AlphaCom server, but stored locally on the PC only.

• Driver: Select the pager driver that corresponds to the pager you have installed. The following pager driver options are available:

• No driver
• Tateco
• Ericsson
• Multitone

• Receiver Type: The following receiver types are available:

• Unknown Type
• Tateco 800/900
• Ericsson PSP800
• Multitone RPR530

• Receiver Number: This must correspond to the number the pocket pager receiver was given when the pager system was programmed. (Usually this correspopnds to the number shown in the display window in the pager)

• Multiple Answer: Activate this option to activate the Multiple Answer feature for paging. Then you can send a message to a group of pagers and make it possible for all of them to answer the paging. The pager must be set up in the paging system. Mutiple Answers are only applied for paging with a Voice Message(47).

General Settings tab

Pocket Pager Answer Wait Time	Answer time after a paging call with pager code 45
Pocket Pager Voice Message Wait Time	Answer time after a paging call with pager code 47.
Pocket Pager Call Repettitions	Sets the limit for the number of repetitions of the paging command in the pager system.
Pocket Pager Number of Bleeps	Sets the number of bleeps you hear when your pager is activated.
Priority Pager Call Repetitions	Description Missing
Priority Pager Number of Bleeps	Description Missing