Difference between revisions of "Increased volume on ringing signal"
From Zenitel Wiki
| Line 1: | Line 1: | ||
| + | {{A}} | ||
This article describes how to increase the volume of the private ringing signal, and set it back to normal when the call is answered (or canceled). | This article describes how to increase the volume of the private ringing signal, and set it back to normal when the call is answered (or canceled). | ||
Revision as of 08:35, 11 January 2017
This article describes how to increase the volume of the private ringing signal, and set it back to normal when the call is answered (or canceled).
As from firmware version AMC 10.23 the volume to a station can be changed by the data command VOL. By using the event type 9 - Private Ringing mode in the Event Handler, one can set a higher volume during the ringing, and set it back to a normal level when the call is answered (i.e. when the Private Ringing mode goes off).
In AlphaPro, go to Exchange and System -> Events, press Insert and create the following event:
| Event Owner: | Stations w/ UDP, Id: 8 (all stations) |
| Event type: | 09 - Private Ringing mode |
| When change to: | ON or OFF |
| When related to: | All |
| Action: | $VOL L%1.dir U%chg(6,3) |
When a station starts to ring the volume is set to level 6, and when the ringing stops the volume is set to level 3.