Difference between revisions of "Powering Additional Equipment"
From Zenitel Wiki
(→AlphaCom XE26) |
|||
| Line 12: | Line 12: | ||
==AlphaCom XE26== | ==AlphaCom XE26== | ||
| − | When using additional equipment with an AlphaCom XE26 Exchange, power can be distributed to the external equippment via the [[ | + | When using additional equipment with an AlphaCom XE26 Exchange, power can be distributed to the external equippment via the [[Power Distribution Board| Power Distribution Board, PDB]]. The PDB board provides +5VDC, +15VDC, +24VDC and +32VDC from a number of outputs with several different connection types. |
The PDB board contains a 1 Ampere fuse for each voltage. | The PDB board contains a 1 Ampere fuse for each voltage. | ||
[[Image:E26-PDB.png|thumb|500px|left|E26 with PDB board]] | [[Image:E26-PDB.png|thumb|500px|left|E26 with PDB board]] | ||
Latest revision as of 13:02, 3 November 2016
Additional equipment often need power to be able to operate as intended. The source of such power varies depending on the type of exchange.
AlphaCom XE7
If the additional equipment is located in close proximity to an AlphaCom XE7 Exchange, the exchange can provide 24VDC from a dedicated output. If other kind of power is required, or if the additional equipment is mounted away from the exchange, a suiteable local power supply is needed.
AlphaCom XE20
The AlphaCom XE20 Exchange has an ouput which allows for connection of +5VDC, +15VDC and +24VDC. Each output is protected by a 1 Ampere fuse. Additional equipment that requires an external power source may use these outputs.
AlphaCom XE26
When using additional equipment with an AlphaCom XE26 Exchange, power can be distributed to the external equippment via the Power Distribution Board, PDB. The PDB board provides +5VDC, +15VDC, +24VDC and +32VDC from a number of outputs with several different connection types. The PDB board contains a 1 Ampere fuse for each voltage.
