Group Call - Increased volume: Difference between revisions
From Zenitel Wiki
No edit summary |
No edit summary |
||
| Line 12: | Line 12: | ||
|width="400pt"|Station Id: Id: 1 (101 The Door) | |width="400pt"|Station Id: Id: 1 (101 The Door) | ||
|- | |- | ||
|'''Event type''': || [[ | |'''Event type''': || [[Conversation Outgoing (Event Type)|08 - Conversation Outgoing]] | ||
|- | |- | ||
|'''Sub event''': || 0 | |'''Sub event''': || 0 | ||
|- | |- | ||
|'''When change to''': || ON | |'''When change to''': || ON or OFF | ||
|- | |- | ||
|'''When related to''': || Directory Number | Id: | |'''When related to''': || Directory Number | Id: 86 | ||
|- | |- | ||
|'''Action:''' | | |'''Action:''' || | ||
| | |||
|- | |- | ||
|} | |} | ||
Revision as of 15:13, 2 June 2015
This article describes how to increase the volume of a group call announcement. The volume is set back to default value when the group call is ended.
Minimum software is AMC version 11.
In the following example a door station (101) is making a group call with repeatative gong to group 4. The members in group 4 also needs to be members of UDP group 7. In AlphaPro, go to Exchange and System -> Events, press Insert and create the following events:
| Event Owner: | Station Id: Id: 1 (101 The Door) |
| Event type: | 08 - Conversation Outgoing |
| Sub event: | 0 |
| When change to: | ON or OFF |
| When related to: | Id: 86 |
| Action: |
IF %chg(1,0) tmp 0 "%gns(%2.phy,0)" LOOP IF %op(%tmp(0),=,0) STOP ENDIF $VOL N%tmp(0) U6 tmp 0 "%gns(%2.phy, %tmp(0))" ENDLOOP stop ENDIF tmp 0 "%gns(%2.phy,0)" LOOP IF %op(%tmp(0),=,0) STOP ENDIF $VOL N%tmp(0) U3 tmp 0 "%gns(%2.phy, %tmp(0))" ENDLOOP