INCA 2.1 - Release Notes
From Zenitel Wiki
Previous Release - INCA 1.0 - Release Notes
Next Release - INCA 2.2 - Release Notes
This document provides the release notes for INCA 2.1 with incremental bug fix releases. The release notes for INCA 2.1 describe new features, improvements and issues fixed after INCA 1.0.
Contents
- 1 Version 02.01.3.3
- 2 Version 02.01.3.2
- 3 Version 02.01.3.1
- 3.1 New Features
- 3.1.1 Added support for having one firmware for Pulse, SIP and AlphaCom mode
- 3.1.2 Factory default station mode is Pulse
- 3.1.3 New web interface
- 3.1.4 Removed SIP license requirement
- 3.1.5 It is possible to change station mode in the display (aswell as in the station web)
- 3.1.6 Added support for IP Heavy Duty
- 3.1.7 Added support for new audio levels
- 3.1.8 Added support for High Availability
- 3.1.9 Added Pulse server mode - In Pulse server mode the station can act as a server for other stations and configure Pulse stations
- 3.1.10 Added Pulse mode - In Pulse mode the station can register to a Pulse server
- 3.1.11 Master stations, Substations, IP Heavy Duty and IP Desktop are supported as Pulse stations
- 3.2 Bugfixes and Improvements
- 3.2.1 Added support for IP Heavy Duty, Desktop and Master as SIP stations
- 3.2.2 The station now retransmits 200 OK and ACK on INVITE messages. If these messages were lost the conversation was not set up
- 3.2.3 Fixed an issue where calls were not released when DNS failed
- 3.2.4 Fixed an issue where To tag was not sent in ACK. This could result in conversations not being set up
- 3.2.5 There is now a 1 second delay when going to the next entry in the ringlist to reduce load on the server
- 3.2.6 Changed the web interface for ringlist
- 3.2.7 Added NTP client and configuration
- 3.2.8 Added logging to web interface. This feature will be expanded with more logging messages in the future releases. Note that the logging is to memory only and will be lost on restart
- 3.2.9 If the station finds TFTP remote provisiong the station will be a SIP station after applying the configuration
- 3.2.10 The station will now answer OPTIONS messages outside of a dialog
- 3.3 Known Issues
- 3.1 New Features
- 4 Version 02.01.2.2
- 5 Version 02.01.2.1
Version 02.01.3.3
NOTE: This release is only for the IP-Master, IP-Desktop and IP-substations, cannot be used for IP-ARIO or IP-dualdisplay
System upgrade file:
Image: A100G80200.02_01_3_3.bin
Checksum: 9CF2A744
Bugfixes and Improvements
Relayed multicast did not work. This is fixed now
Version 02.01.3.2
NOTE: This release is only for the IP-Master, IP-Desktop and IP-substations, cannot be used for IP-ARIO or IP-dualdisplay
System upgrade file:
Image: A100G80200.02_01_3_2.bin
Checksum: DF0889BE
Bugfixes and Improvements
Added check on image name. Normal stations should not accept dualdisplay images and vice versa. Dualdisplay images got a D in the image name (A100G802D0.version)
Fixed an issue where pushed keys were not shown during calls in SIP
Version 02.01.3.1
NOTE: This release is only for the IP-Master, IP-Desktop and IP-substations, cannot be used for IP-ARIO or IP-dualdisplay
New Features
Added support for having one firmware for Pulse, SIP and AlphaCom mode
Factory default station mode is Pulse
New web interface
Removed SIP license requirement
It is possible to change station mode in the display (aswell as in the station web)
Added support for IP Heavy Duty
Added support for new audio levels
Added support for High Availability
Added Pulse server mode - In Pulse server mode the station can act as a server for other stations and configure Pulse stations
Added Pulse mode - In Pulse mode the station can register to a Pulse server
Master stations, Substations, IP Heavy Duty and IP Desktop are supported as Pulse stations
Bugfixes and Improvements
Added support for IP Heavy Duty, Desktop and Master as SIP stations
The station now retransmits 200 OK and ACK on INVITE messages. If these messages were lost the conversation was not set up
Fixed an issue where calls were not released when DNS failed
Fixed an issue where To tag was not sent in ACK. This could result in conversations not being set up
There is now a 1 second delay when going to the next entry in the ringlist to reduce load on the server
Changed the web interface for ringlist
Added NTP client and configuration
Added logging to web interface. This feature will be expanded with more logging messages in the future releases. Note that the logging is to memory only and will be lost on restart
If the station finds TFTP remote provisiong the station will be a SIP station after applying the configuration
The station will now answer OPTIONS messages outside of a dialog
Known Issues
===Pulse - Sending Re-invite to remote station from a station that is not allowed to call to remote station (due to profile configuration) does not work
Pulse - Gateways are not fully supported
SIP - 183 Session Progress is not fully supported
Version 02.01.2.2
NOTE: This release is only for the IP-dualdisplay
System upgrade file:
Image: A100G802D0.02_01_2_2.bin
Checksum: 21AC3FC8
Bugfixes and Improvements
Relayed multicast did not work. This is fixed now
Version 02.01.2.1
NOTE: This release is only for the IP-dualdisplay