School IP Intercom - 1402001000

Connections

• Intercom connections

Configuration

The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.

Note that the off-line display menu is not available for the School IP Intercom, as the navigation buttons are not present on this station. The station must be configured via the web interface.

General configuration.

• IP Station Configuration - AlphaCom mode
• IP Station Configuration - Edge mode
• IP Station Configuration - SIP mode
• IP Station Configuration - Pulse mode

Station specific configuration for the School IP Intercom:

• Configuration of School IP Intercom station - AlphaCom mode
• Configuration of School IP Intercom station - Edge mode
• Configuration of School IP Intercom station - Pulse mode
• Configuration of School IP Intercom station - SIP mode

Restore Factory Defaults and Software Upgrade

• Reset to factory settings
• Upgrade via the station web interface
• Upgrade using the IMT tool
• Automatic Software Upgrade (SIP mode only)

Connectors, Indicators and Dimensions

• Board Connectors
• Station LED Indications
• PCB LED Indications
• Dimensions

Accessories

• Surface-Mount Backbox for School IP Intercom (1402001010)
• Flush-Mount Backbox for School IP Intercom (1402001030)

Software Requirements

This station is fully supported as form AlphaCom version 10.50

Additional Information

• Additional Documentation on Zenitel.com