VSF-Fortitude6 9.0 Release Notes
From Zenitel Wiki
- Previous Release - VSF-Fortitude6 8.2 Release Notes
This document provides the release notes for VSF-Fortitude6 9.0 with incremental bug fix releases. The release notes for VSF-Fortitude6 9.0 describe new features, improvements and issues fixed after VSF-Fortitude6 8.2.3.3.
Contents
- 1 Release info
- 2 VSF-FORTITUDE6 9.0.3.0
- 2.1 Improvements
- 2.1.1 MTN-4397 Improved certificate handling, and split SIP and HTTPS certificates into separate pages
- 2.1.2 MTN-3557 New configuration option for RTSP Audio Source
- 2.1.3 DS-1034 Added support for codec L16x48 to Multicast Paging config
- 2.1.4 DS-970 Added multicast relay feature
- 2.1.5 DS-889 Operate output when the call button is pressed in idle
- 2.2 Fixed Issues
- 2.2.1 MTN-4435 RTSP stream could stop in some cases
- 2.2.2 MTN-4394 Multicast paging working again on intercom devices
- 2.2.3 MTN-4362 Fixed wrong description in Sound Detection settings
- 2.2.4 MTN-4340 ONVIF backchannel could cut last second of audio
- 2.2.5 MTN-4329 Fixed an issue with wrong intervals for ONVIF events reports
- 2.2.6 MTN-4320 Weak cipher suites no longer supported on devices
- 2.2.7 MTN-4246 Fixed an issue with input status on CRM-V2 that was lost after ICX-AlphaCom restart
- 2.2.8 MTN-4228 Turbine devices could not be used with Bosch VMS
- 2.1 Improvements
Release info
Name: VSF-Fortitude6
Description: VSF-Fortitude6 is a firmware for Zenitel devices based on the IMX6 processor.
The firmware is delivered in two different files:
- vsff6-9.0.3.x - Used for standard in-field upgrades
- vsff6-prod-9.0.3.x - Used in production- and recovery upgrades.
Version: 9.0.3.0
Date: 03.10.2024
Status: General Availability
VSF-FORTITUDE6 9.0.3.0
Improvements
MTN-4397 Improved certificate handling, and split SIP and HTTPS certificates into separate pages
Split SIP and HTTPS certificates into separate pages, removed turbine_server_sha1.key private key and TLS Private Key option, added factory reset handling, added backup and recovery for SIP certificates, fixed certificate regeneration on some devices, removed private keys from the device web page.
MTN-3557 New configuration option for RTSP Audio Source
There’s a new option for configuring RTSP Audio Source, “Mixed signal”. This option mixes far and near end signal.
DS-1034 Added support for codec L16x48 to Multicast Paging config
Devices can now listen to raw PCM 48 kHz audio stream (L16x48) when configured in HD-Audio mode.
DS-970 Added multicast relay feature
Device can now relay incoming RTP to specified address and port.
DS-889 Operate output when the call button is pressed in idle
Added option to configure operation of relays and outputs when the call button is pressed.
Fixed Issues
MTN-4435 RTSP stream could stop in some cases
In case of audio issues, RTSP stream would terminate. Now the stream will continue with a moment of silence instead.
MTN-4394 Multicast paging working again on intercom devices
Multicast paging was not working on intercom devices when configuring from the webpage. This is now fixed.
MTN-4362 Fixed wrong description in Sound Detection settings
The description of “Minimum time before reactivation” is corrected to “Choose how long to wait before enabling VAD after triggering the DAK key”
MTN-4340 ONVIF backchannel could cut last second of audio
In some cases backchannel could cut around last second of audio when using push to talk or pre-recorded messages that terminate backchannel session.
This does not happen anymore if client sends TEARDOWN command correctly.
MTN-4329 Fixed an issue with wrong intervals for ONVIF events reports
Fixed an issue with wrong parsing of some PullMessages parameters. In some VMSs, PullMessages parameters Timeout and MessageLimit were not parsed correctly on VS-IS8.0.3.2 and wrong values were used.
MTN-4320 Weak cipher suites no longer supported on devices
Removed the AES128-SHA AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-RSA-AES256-SHA:CAMELLIA128-SHA:CAMELLIA256-SHA ciphers reported by security scanner
MTN-4246 Fixed an issue with input status on CRM-V2 that was lost after ICX-AlphaCom restart
After ICX-AlphaCom was restarted the input status of the CRM-V2 was lost. This is now fixed.
MTN-4228 Turbine devices could not be used with Bosch VMS
There was a problem on Zenitel ONVIF devices that caused software to crash and device to reboot which made Bosch VMS unable to connect to the device.