SEND MAIL
From Zenitel Wiki
| SEND_MAIL | 0x0031 | 49 | AMC 05.00 | |
|---|---|---|---|---|
| $SM L101 L102<br\>$SM L101 L102 U100 NM18 GV U1<br\>$SM L101 L102 U100 NM26 GV U0<br\>$SM L101 L102 U100 NM17 GV U1 'my name' U0 | Call Request mail (from AMC 08.11)<br\>Call Request mail<br\>‘Temperature Alarm’<br\>Call request, user defined name text | |||
| Send a predefined mail message to an intercom station.<br\><br\>
From AMC 08.11 most parameters can be left out. Default values correspond to Normal priority Call Request.<br\>
AlphaNet: Be aware of which exchange fills in default parameters, see page 70. | ||||
| 1 | NET_OBJ_REF<br\>{ECL_STATION} | Sending station.<br\>Null value allowed (e.g.for technical alarms). | ||
| 2 | NET_OBJ_REF<br\>{ECL_STATION,<br\>ECL_ST_GROUP} | Receiving station or local group.<br\>.<br\>. | ||
| 3 | UINT1<br\>(optional 08.11) | Mail Priority 0 - 255<br\> see below: Default value: 100. | ||
| 4 | NET_OBJ_REF<br\>{NRF_LOCAL_DIRNO<br\>ECL_MAIL<br\>ECL_MAIL}<br\>(optional 08.11) | Which Mail Message or Null if no message. See Predefined AlphaCom mails.<br\>-> Mail message with directory number.<br\>-> Call Request, mail individ 17 (alarm) and 18 (normal).<br\>-> Technical alarm, mail individ 19-30. <br\>Default value: 18. | ||
| 5 | NET_OBJ_REF<br\>(optional 08.11) | Extra parameter (time / date / phone number) in DIGIT_STRING format. <br\>Default value: Null. | ||
| 6 | UINT1<br\>(optional 08.11) | Mail Flags: see below<br\>Default value: 1. | AMC 07.00 | |
| 7 | TEXT16<br\>(optional 07.60) | Name of sending station (16 character).<br\>Default value: Sending station’s name. | AMC 07.00 | |
| 8 | UINT1<br\>(optional 07.60) | User Defined Properties (UDP) of the sending station. <br\>Default value: 0. <br\>Note: If Parameter 7 is used, this parameter MUST be filled in also. | AMC 07.00 | |
| 9 | UINT1<br\>(optional) | Hop Count. AlphaNet: Used to avoid endless mail forwarding. Incremented by AMC, discarded when too large.<br\>Default value: 0. | ||
| Response: | SEND_MAIL_ACK, SET_CALL_REQ_MODE | |||
Mail priority
Parameter 3
- = 30 Default priority for standard mail (sent from conversation, 7 + 66x; or 8)
- >= 60 Threshold: Receiver gets notification tone(single dut-dut-dut)
- = 80 Default priority for tech. alarm mail messages (RCI strings).
- >= 100 Threshold: Received Mail event generated on receiver (changeable : ex_profile. glob_const.queue_ind_priority)
- = 100 Default priority for "low priority" Call Requests (dirno 623)
- = 101 Default priority for "low priority" Call Requests alternative text (dirno 625)
- = 110 Default priority for mail upon fire alarm.
- >= 120 Threshold: Receiver gets Urgent Feature Reminder tone (repeated dut-dut-dut)
- = 140 Default priority for "high priority" Call Requests (dirno 622)
- = 141 Def. pri. for "high pri." Call Requests alternative text (dirno 624)
- >= 150 Threshold: Receiver gets ring tone (changeable : ex_profile.glob_const.priv_ring_mail_pri)
Mail flags
Parameter 6 is a combination of any the following bits/flags:
- bit 1 (value 1) = the mail is a call request. The station receiving the mail will respond with SET_CALL_REQ_MODE to the sender station. (MAIL_FLAG_CALL_REQUEST)
- bit 2 (value 2) = the mail is sent to a group of stations and you want the mail deleted from all queues once the mail has been read by a station. (MAIL_FLAG_GROUP_DELETE)
- bit 3 (value 4) = Display the mail in Idle on normal stations. (MAIL_FLAG_IDLE_SHOW)
- bit 4 (value 8) = Automatic Call Request Delete. If a call request with this flag is deleted from one station, then delete all call request mails from all station with same source address. (MAIL_FLAG_ALL_CREQ_DEL, new in AMC 10.22)
- bit 5 (value 16) = If priority is in the private ringing mode range use UK style ringing pattern. (MAIL_FLAG_PRIV_RING_UK, new in AMC 10.22)