M-key (Event Type)
From Zenitel Wiki
Event description
Event Owner: | A station or an UDP group |
Event type: | 31 - M-key |
Subevent: | Sub Event = 0 will give M key status when station is busy.<br\>Sub Event = 1 will give M key status when station is idle. |
When change to ON: | M key pressed |
When change to OFF: | M key released |
When related to: | N/A |
Application
Switch over a PA-system to a standby circuit
Additional information
There is a default "Faulty Line" event which becomes active if one more stations are faulty. This event is used for general line error reporting. The reporting is configured from AlphaPro, Exchange & System -> RCI -> Faults: Faulty Line. Default setting is MST 1 0 28, which is by reporting line errors (28) to station 1.
Event description
Event Owner: | A station or UDP group |
---|---|
Event type: | 31 - M-key |
Sub-Event: | Sub Event = 0 will give M key status when station is busy.<br\>Sub Event = 1 will give M key status when station is idle. |
When Change to ON: | M key press |
When Change to OFF: | M key release |
When Related to: | N/A |