GROUP MSG
From Zenitel Wiki
| GM (GROUP_MSG) | 0x00A6 | 166 | AMC 11.00 | |
|---|---|---|---|---|
| $GM L84 L8181 $GM L85 L8193 U1 U0 U0 $GM L9001 L8182 U10 U0 U0 $GM NG1 N!4 U3 U2 U0 $GM L84 L102 U1 U0 U2 U2 W1 L8181 |
No repetition and use group gong and priority No repetitions and no gong 10 repetitions and no gong To group 1 (84), activate alarm message 4 (8194), 3 repetitions, use gong type 2 (dong-ding) Start group call from station 102 to group 84, use message 8181 as Chime instead of ding dong. | |||
| GROUP_MSG sets up a local or global group call with source a SVP message. To stop message playback use GROUP_MSG_STOP | ||||
| 1 | NET_OBJ_REF {ECL_LOCAL_GROUP, <BR\> ECL_GLOBAL_GROUP} |
Destination local or global group | ||
| 2 | NET_OBJ_REF {ECL_ANNOUNCEMENT, ECL_STATION, ECL_USER} |
Initiator station or Announcement message for playback in group. Note: Software AMC 11.5.3.3 is required to support the N!x parameters above 9. Earlier versions work for announcement message 1-9 only (N!1 - N!9). | ||
| 3 | UINT1 (optional) |
SVP Message repetitions 0-255. 0 or unspecified means 1 repetition. 255 means repeat indefinitely (use GROUP_MSG_STOP to stop). (If PA bitmap defined, this parameter is overrun by the PA bitmap def) | ||
| 4 | UINT1(optional) | Gong type. 0 = no gong. 255 or unspecified = use gong type of group. | ||
| 5 | UINT1 (optional) |
Group call priority, default 0 = use priority of group call. 1 = Low, 2 = Medium, 3 = High, 4 = Alarm. "Alarm" priority will activate Volume and Handset Override | ||
| 6 | UINT1 (optional) |
Initiator priority, Only when source is user/station . Default 0 = Configured station priority 1 = Low, 2 = Medium, 3 = High, 4 = Alarm. | ||
| 7 | UINT2 (optional) |
PA bitmap as described in PA activation, PA control bitmap (12.3.3.5) | ||
| 8 | NET_OBJ_REF (optional) {Feature 67/111} |
Message used as Chime if Initator station is used.(12.3.3.5) | ||
| Response | none | |||