Password (ENA Amplifiers)

The password of an ENA Amplifier can be changed by:

• Log into the amplifier
• Select Station Administration > Change Password.

Web Password

The Web Password is the password you need to use in the web browser of your PC to get access to the web interface of an ENA amplifier.

• User: The default username admin can be changed here
• Old Password: Enter the old password for security. Default is alphaadmin
• New Password: Enter a new password
• Confirm New Password: The new password must be confirmed to avoid misprint

Password can only contain numbers and letters, no other symbols allowed.

A factory reset will reset to default password.

Device GUI PIN

By default the display menu of the amplifier can be accessed without any pin code. However, it is possible to enable pin code access. Two levels can be defined, Read or Full Access.

• PIN protect GUI: When enabled you need to insert a PIN code to access the display menus

Two users can be defined. For each user:

• User Name: Any text
• PIN: The pin code for accessing the display menu
• Access Level: Read Access or Full Access