Private - Set Always Private

In a Pulse System, when a call is made from a substation, e.g. from a Door Entry, you normally want the call to be in Private ringing mode (Auto Answer off), regardless of the Auto Answer settings on the station being called.

This can be achieved by setting up the call via the Ringlist, as calls set up via the Ringlist will always be in private ringing mode.

Configuration

Log on to the web interface of the substation, and navigate to SIP Configuration > Direct Access Key Settings.

Set Options = Ringlist 1, and in Ringlist 1 enter the Directory Number of the destination.

Example:

Call to station number 19 - the call will be set up in Private Ringing mode

Additional information

If you configure like this...

Call to station number 19 - the call mode will depend on AutoAnswer setting at the called station

...the call mode (Private or Open) will depend on the Auto Answer settings at the called station number 19.